Using the audio
To play sound from the projector, connect your source to the Audio In con- | connect audio cable |
nector on the projector. |
|
To adjust the volume, use the buttons on the keypad. |
|
To adjust the balance or turn off the projector’s chime, use the Audio menu |
|
(see page 28). |
|
Troubleshooting audio
If there is no sound, check the following: | adjust volume |
• Make sure the audio cable is connected. |
|
• Make sure mute isn’t active. |
|
• Make sure the volume is turned up enough. Press the Volume button |
|
on the keypad. |
|
• Adjust the audio source. |
|
• If playing a video, make sure the playback has not been paused. |
|
Connecting external speakers
The projector can be attached to external speakers that have their own power source by plugging a speaker cable into the projector’s Audio Out connector.
external speakers
speaker 
cable
22