Ask Proxima C175 manual Presets

Page 27

Presets: Presets are provided that optimize the projector for displaying computer presentations, film images, and video images. Film input is mate- rial originally captured on a film camera, like a movie; video input is mate- rial originally captured on a video camera, like a TV show or sporting event.

There are also user-definable presets. To set a preset for the current source, adjust the image, select Save Settings in the Presets menu, then select Save

Presets

User 1 (or 2 or 3). You can recall these settings in the future by selecting the

User 1 preset.

If you make any adjusts the image, Presets Off will automatically be selected in the Preset menu to indicate changes have been made.

To restore the factory default settings, choose Factory Reset in the Set- tings>Service menu.

26

Image 27
Contents User’s Guide EN 55022 Warning Declaration of ConformityTrademarks FCC WarningTable of Contents Introduction Connector panel Connector PanelConnecting a computer Required computer connectionsOptional computer connections Page ? No startup screen? Get help on Displaying a computer imageAdjusting the image Connecting a video device Displaying a video image Page Troubleshooting your setup Status indicator light behavior and meaningShutting down the projector Page No computer image, just the words Signal out of range Image clear and not cropped Page Page Projected colors don’t match source Still having problems? Lamp won’t turn on, Temperature light is onLamp must be replaced Lamp turns on Auto image-resets the projector to the source Using the keypad buttonsTroubleshooting the remote Using the remote controlUsing the audio Troubleshooting audioConnecting external speakers Customizing the projector Presentation featuresOptimizing computer images Optimizing video imagesUsing the menus Picture menu Presets Advanced settings Settings menu Save is disabled when Power Save is enabled Custom Key Language Service menu To change the PIN PIN featureTo reset the PIN back to the default To enter the PIN at projector startupMaintenance Cleaning the lensUsing the security lock Replacing the projection lamp Resetting the lamp timer Cleaning the lamp filter screens Projected image size AppendixIndex