BenQ MP770 user manual Vga

Page 23

To connect the projector to a notebook or desktop computer (either through a VGA cable or VGA to DVI-A cable):

•

With a VGA cable:

•

With a VGA to DVI-A cable:

 

 

 

 

1.

Take the supplied VGA cable and

1.

Take a VGA to DVI-A cable and

 

connect one end to the D-Sub

 

connect the VGA end to the D-Sub

 

output socket of the computer.

 

output socket of the computer.

2.

Connect the other end of the VGA

2.

Connect the DVI end of the VGA to

 

cable to the D-SUB/COMP. IN

 

DVI-A cable to the DVI-I signal

 

signal input socket on the projector.

 

input socket on the projector.

 

 

 

 

3.If you wish to use the remote paging function (see "Remote paging operations" on page 42), take the supplied USB cable and connect the larger end to the USB port of the computer, and the smaller end to the USB socket on the projector.

4.If you wish to make use of the projector (mixed mono) speaker in your presentations, take a suitable audio cable and connect one end of the cable to the audio output socket of the computer, and the other end to the AUDIO IN socket of the projector.

5.If you wish, you can use another suitable audio cable and connect one end of the cable to the AUDIO OUT socket of the projector, and the other end to your external speakers (not supplied).

The audio output is a mixed mono signal. Once connected, the audio can be controlled by the remote control (MUTE) or projector On-Screen Display (OSD) menus. See "Audio Settings" on page 50 for details.

The final connection path should be like that shown in the following diagram: notebook or desktop computer

 

 

 

Speakers

 

 

 

Audio cable

 

USB cable

VGA

or

VGA to

Audio cable

 

cable

 

DVI-A

 

 

 

 

cable

 

•Many notebooks do not turn on their external video ports when connected to a projector. Usually a key combo like FN + F3 or CRT/LCD key turns the external display on/off. Locate a function key labeled CRT/LCD or a function key with a monitor symbol on the notebook. Press FN and the labeled function key simultaneously. Refer to your notebook's documentation to find your notebook's key combination.

Connection 23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Welcome Disclaimer CopyrightTable of contents Troubleshooting Specifications Do not look straight at the projector Important safety instructionsRefer servicing to qualified service personnel Future reference Projector lamp is onSafety Instructions Bedding or any other soft surface 10000 Feet Important safety instructionsSafety Instructions Introduction Projector featuresIntroduction Shipping contents Rear side Projector exterior viewFront/upper side Projector Controls and functionsAuto Lamp indicator lightRemote control Mute LED indicator lightPIP ModeFront Rear Remote control effective rangeRemote control batteries Choosing a location Positioning your projectorSafety instructions for ceiling mounting of the projector Obtaining a preferred projected image size Page Projection dimensions Cable connection Wireless connection optionalConnecting a computer or monitor ConnectionVGA Socket, not the DVI-I socket With a VGA cable With a VGA to DVI-A cableLeast video quality Connecting Video source devicesBest video quality Better video qualityConnecting Audio Connecting a DVI source deviceDVI-D or DVI-I cable Audio Audio Cable cable AV device1080i 50/ 60 Hz To connect the projector to an S-Video source device Connecting an S-Video source deviceConnecting a composite Video source device Operation OperationStart up Up , Right, Down, Left respectively Utilizing the password functionSetting a password If you forget the passwordDisabling the password function Entering the password recall procedureChanging the password Remote control. a source selection bar displays. You Switching input signalAdjusting the projected image Adjusting the projection angleCorrecting keystone Auto-adjusting the imageFine-tuning the image size and clarity Searching for details on the projected imageYou are satisfied with the shape Control. Go to the Display Keystone menuSelecting the aspect ratio Optimizing the image Selecting an application modeSetting the User 1/User 2 mode Go to the Picture Application Mode menuSelecting a color temperature Fine-tuning the image quality in user modesAdjusting brightness Adjusting contrastHiding the image Other adjustmentsOperating in a high altitude environment PIP Picture In Picture operation Creating your own startup screen Remote paging operationsFreezing the image Message will disappear Personalizing the projector menu displayShutting down the projector PressVideo source Cinema/Movie Menu operationMenu system PC source BrightestAdvanced Information ResolutionBasic Use Left/ Right to select the Display menu Using the menusDisplay menu Picture menu Source menu System setup Basic menu System setup Advanced menu Source Mode ResolutionLamp Timer Information menuCare of the projector MaintenanceClean the Air Filter To clean the filterCheck the Air Filter Replacing the filter spongeCalculation of lamp hour Lamp informationOut of Lamp Usage Time Replacing the lampPage Restart the projector Temperature informationTighten the screw that secures the lamp Illustration IndicatorsStand-by mode Powering upLight Status & Description Power Temp Lamp Thermal events Make sure that it is switched on Plug the power cord into the AC inlet onRemote mouse function does not work Projector specifications SpecificationsSupported timing for Video and S-Video inputs Timing chartSupported timing for PC including DVI-I input Supported timing for Component-YPbPrinputMm W x 94 mm H x 230 mm D 298 Unit mm Specifications DimensionsLimited warranty WarrantyMIC statement Regulation statementsFCC statement EEC statement
Related manuals
Manual 68 pages 9.95 Kb
Top Page Image Contents