BenQ MP770 user manual Display menu

Display menu

FUNCTION	DESCRIPTION (default setting/value)
(default setting/
value)
Aspect Ratio	There are four options to set the image's aspect ratio depending on your
	input signal source.
(Auto)	See "Selecting the aspect ratio" on page 37 for details.
Keystone	Corrects any keystoning of the image. See "Correcting keystone" on page
	35 for details.
(0)
Position	Displays the position adjustment page. To move the projected image,
	use the directional arrow buttons. The values shown on the lower

(0)position of the page change with every button press you made until they reach their maximum or minimum.

Phase	Adjusts the clock phase to reduce image
	distortion.
(depends on the
selected input
source)
H. Size	Adjusts the horizontal width of the image.
(depends on the
selected input
source)
Digital Zoom	Magnifies or reduces the projected image. See "Searching for details on
	the projected image" on page 35 for details.
(100%)
Pan	Displays the Pan page for searching the details of the projected image by
	using the directional arrow buttons on the projector or remote control
	after the image is magnified.
	PIP (Off)
	Turns the PIP window on or off
	Source (Video)
	Selects the source for the PIP.
	Position (Top-Left)
	Selects a desired position for the PIP.
PIP Settings	Size (Large)
	Selects a suitable size for the PIP.
	Saturation (0)
	Adjusts the color saturation level.
	Hue (0)
	Adjusts the red and green color tones of the image.
	See "Saturation" on page 48, "Hue" on page 48, "PIP (Picture In Picture)
	operation" on page 41 for details.

Operation 47