BenQ MP515, MP576 Remote control effective range, Replacing the remote control battery, Timer On

Page 13

13. Timer On

15. Page Up/Down

Activates or displays an on-screen timer based on your own timer setting.

(This function is not available with the MP5 series models.)

"Setting the presentation timer" on page 37

14.Timer Set up

Enters presentation timer setting

directly.

"Setting the presentation timer" on page 37

Remote control effective range

Infra-Red (IR) remote control sensor is located on the front of the projector. The remote control must be held at an angle within 30 degrees perpendicular to the projector's IR remote control sensor to function correctly. The distance between the remote control and the sensor should not exceed 8 meters (~ 26 feet).

Make sure that there are no obstacles between the remote control and the IR sensor on the projector that might obstruct the infra-red beam.

Replacing the remote control battery

1.Pull out the battery holder.

Please follow the illustrated instructions. Push and hold the locking arm while pulling out the battery holder.

2. Insert the new battery in the holder. Note the positive polarity should face outward.

3.Push the holder into the remote control.

• Avoid excessive heat and humidity.

• There may be battery damage if the battery is incorrectly replaced.

• Replace only with the same or equivalent type recommended by the battery manufacturer.

•Dispose of the used battery according to the battery manufacturer's instructions.

•Never throw a battery into a fire. There may be danger of an explosion.

•If the battery is dead or if you will not be using the remote control for a long time, remove the battery to prevent damage to the remote control from possible battery leakage.

Introduction 13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Welcome Table of contents Safety Instructions Important safety instructionsRefer servicing to qualified service personnel Safety Instructions Locations near fire alarms Installation Introduction Projector featuresShipping contents Front/upper side Projector exterior viewRear/lower side Projector Controls and functionsMode/Enter Selects an available picture setupMode Activates the selected On-Screen Display OSD menu itemVolume + Remote controlFreeze Digital Zoom +Replacing the remote control battery Remote control effective rangeTimer On Timer Set upChoosing a location Positioning your projectorSelect your screen size Aspect image in a Aspect display areaPositioning your projector Inch Projection dimensionsConnection Connecting a computer Connecting a computer or monitorConnecting a monitor To connect the projector to a notebook or desktop computerConnecting audio Connecting Video source devicesTo connect the projector to a Component Video source device Connecting a Component Video source deviceTo connect the projector to an S-Video/Video source device Connecting an S-Video/composite Video source deviceStarting up the projector OperationAdjusting the projection angle Adjusting the projected imageAuto-adjusting the image Using the remote control Fine-tuning the image size and clarityCorrecting keystone Use / to highlight the System Setup Basic menu Using the menusUtilizing the password function Using a security cable lockSetting a password To the Security SettingsChanging the password If you forget the passwordEntering the password recall procedure Confirm the new password by re-entering the new passwordDisabling the password function Switching input signal Magnifying and searching for details Using the OSD menuSelecting the aspect ratio Press Digital Zoom+/- to display the Zoom barAbout the aspect ratio Selecting a picture mode Using Wall ColorOptimizing the image Fine-tuning the image quality in user modes Adjusting Brilliant Color Adjusting SharpnessSelecting a color temperature About color temperaturesImage immediately To adjust the settingsAt 0, only the saturation of pure red will be Affected Selection Description Setting the presentation timerYou can set the blank time in the System Setup Basic How to use the Timer On key?Hiding the image Freezing the image Utilizing FAQ functionPress Mode/Enter Operating in a high altitude environment To activate the High Altitude ModeLocking control keys Adjusting the sound level Adjusting the soundTurning off the Power On/Off Ring Tone Personalizing the projector menu displayIf you are in a Dhcp environment Configuring the Lan Control SettingsRow If you are in a non-DHCP environmentControlling the projector remotely through a web browser Ii To switch input source, click on your desired signalMenu Exit Auto SourceIiii Iiiv Shutting down the projector Once the cooling process finishes, a Power Off RingMenu system Menu operationMain menu Sub-menu Options BasicAdvanced Informa Description of each menu Timer Color Temperature 3D Color Management Save SettingsColor Tint SharpnessAuto Power Off Menu SettingsBasic Blank Timer Sleep TimerLamp Settings Audio Settings Standby Monitor OutSettings Description Mute Off VolumeFAQ-Image Reset AllInstallation FAQ-FeaturesCare of the projector MaintenanceGetting to know the lamp hour Lamp informationExtending lamp life Appears Lamp has been in operation equivalent to Timing of replacing the lampReplacing the lamp Page Lamp time will be reset to Resetting the lamp timerTighten the screw that secures the lamp Restart the projectorLight Status & Description Power events IndicatorsLamp events Thermal eventsTroubleshooting Specifications Ceiling mount installation DimensionsMm W x 110 mm H x 217 mm D Supported timing for PC input Timing chartSupported timing for Video and S-Video inputs Supported timing for Component-YPbPrinputCopyright Limited warrantyDisclaimer FCC statement Regulation statementsEEC statement Weee directiveRegulation statements
Related manuals
Manual 68 pages 27 Kb

MP526, MP515, MP525, MP575, MP576 specifications

BenQ has established itself as a significant player in the projector market, offering a diverse range of models catering to various applications, from education to business and home entertainment. The BenQ MP575, MP525P, MP576, MP526, and MP525 models represent a blend of advanced technology and user-friendly features designed to meet the needs of modern users.

The BenQ MP575 is renowned for its high brightness and excellent color accuracy, making it suitable for well-lit environments. With a brightness of 3000 ANSI lumens, users can expect clear and vibrant images, even in daylight. This model also incorporates BenQ's proprietary DLP technology, which enhances image sharpness and ensures long-lasting performance without color degradation.

Similarly, the BenQ MP525P presents itself as a versatile option with its lightweight design, making it ideal for on-the-go presentations. It offers a brightness of 2500 ANSI lumens and features a resolution of XGA (1024 x 768), ensuring that text and graphics are sharp and clear. It also supports various input sources, including HDMI, VGA, and USB, giving users flexibility in connectivity.

The BenQ MP576, another impressive model, is designed with enhanced networking capabilities, ideal for corporate environments where collaboration is key. This projector not only offers excellent image quality with a resolution of XGA but also includes features like LAN display, allowing multiple devices to connect wirelessly, thus simplifying the presentation process.

The MP526 mirrors some of the MP575's strengths while focusing on energy efficiency. It features a long lamp life of up to 5000 hours, which significantly reduces maintenance costs and ensures longer periods between lamp replacements. This characteristic is particularly appealing for organizations looking to minimize operational costs.

Last but not least, the BenQ MP525 boasts remarkable portability and ease of use, coupled with a quick start and shutdown feature. This projector is particularly suitable for educators and business professionals who require a reliable device that can be set up and packed away quickly.

All these models underscore BenQ's commitment to delivering high-quality projectors that cater to the needs of diverse users, with features designed to enhance the viewing experience, ensure reliable performance, and facilitate ease of use. Their combination of brightness, resolution, connectivity options, and portability makes them an excellent choice for anyone looking to invest in a projector for various applications.
Top Page Image Contents