BenQ MP526, MP576, MP575, MP525, MP515 Freezing the image, Utilizing FAQ function, Press Mode/Enter

Page 39

Freezing the image

Press on the remote control to freeze the image. The word "FREEZE" will display in the upper left corner of the screen. To release the function, press any key (except the Page Up/Down key) on the projector or remote control.

Even if an image is frozen on the screen, the pictures are running on the video or other device. If the connected devices have active audio output, you will still hear the audio even though the image is frozen onscreen.

Utilizing FAQ function

The INFORMATION menu contains possible solutions to problems regarding image quality, installation, special feature operation and service information.

To get the FAQ information:

1. Press / on the projector or remote control or press Menu/Exit to open the OSD menu and press / to highlight the INFORMATION menu.

2. Press to select FAQ-Image and Installation or FAQ-Features and Service.

3.Press Mode/Enter.

4.Press / to select a problem and press Mode/ Enter for possible solutions.

5.To exit the OSD menu, press Menu/Exit.

Operation 39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Welcome Table of contents Important safety instructions Safety InstructionsRefer servicing to qualified service personnel Safety Instructions Locations near fire alarms Installation Introduction Projector featuresShipping contents Projector exterior view Front/upper sideRear/lower side Projector Controls and functionsActivates the selected On-Screen Display OSD menu item Selects an available picture setupMode/Enter ModeDigital Zoom + Remote controlVolume + FreezeTimer Set up Remote control effective rangeReplacing the remote control battery Timer OnChoosing a location Positioning your projectorSelect your screen size Aspect image in a Aspect display areaPositioning your projector Inch Projection dimensionsConnection To connect the projector to a notebook or desktop computer Connecting a computer or monitorConnecting a computer Connecting a monitorConnecting audio Connecting Video source devicesTo connect the projector to a Component Video source device Connecting a Component Video source deviceTo connect the projector to an S-Video/Video source device Connecting an S-Video/composite Video source deviceStarting up the projector OperationAdjusting the projected image Adjusting the projection angleAuto-adjusting the image Fine-tuning the image size and clarity Using the remote controlCorrecting keystone Use / to highlight the System Setup Basic menu Using the menusTo the Security Settings Using a security cable lockUtilizing the password function Setting a passwordConfirm the new password by re-entering the new password If you forget the passwordChanging the password Entering the password recall procedureDisabling the password function Switching input signal Press Digital Zoom+/- to display the Zoom bar Using the OSD menuMagnifying and searching for details Selecting the aspect ratioAbout the aspect ratio Using Wall Color Selecting a picture modeOptimizing the image Fine-tuning the image quality in user modes About color temperatures Adjusting SharpnessAdjusting Brilliant Color Selecting a color temperatureTo adjust the settings Image immediatelyAt 0, only the saturation of pure red will be Affected Selection Description Setting the presentation timerHow to use the Timer On key? You can set the blank time in the System Setup BasicHiding the image Utilizing FAQ function Freezing the imagePress Mode/Enter To activate the High Altitude Mode Operating in a high altitude environmentLocking control keys Personalizing the projector menu display Adjusting the soundAdjusting the sound level Turning off the Power On/Off Ring ToneIf you are in a non-DHCP environment Configuring the Lan Control SettingsIf you are in a Dhcp environment RowAuto Source Ii To switch input source, click on your desired signalControlling the projector remotely through a web browser Menu ExitIiii Iiiv Shutting down the projector Once the cooling process finishes, a Power Off RingBasic Menu operationMenu system Main menu Sub-menu OptionsAdvanced Informa Description of each menu Sharpness Color Temperature 3D Color Management Save SettingsTimer Color TintSleep Timer Menu SettingsAuto Power Off Basic Blank TimerDescription Mute Off Volume Audio Settings Standby Monitor OutLamp Settings SettingsFAQ-Features Reset AllFAQ-Image InstallationCare of the projector MaintenanceLamp information Getting to know the lamp hourExtending lamp life Appears Lamp has been in operation equivalent to Timing of replacing the lampReplacing the lamp Page Restart the projector Resetting the lamp timerLamp time will be reset to Tighten the screw that secures the lampThermal events IndicatorsLight Status & Description Power events Lamp eventsTroubleshooting Specifications Dimensions Ceiling mount installationMm W x 110 mm H x 217 mm D Supported timing for PC input Timing chartSupported timing for Video and S-Video inputs Supported timing for Component-YPbPrinputLimited warranty CopyrightDisclaimer Weee directive Regulation statementsFCC statement EEC statementRegulation statements
Related manuals
Manual 68 pages 27 Kb

MP526, MP515, MP525, MP575, MP576 specifications

BenQ has established itself as a significant player in the projector market, offering a diverse range of models catering to various applications, from education to business and home entertainment. The BenQ MP575, MP525P, MP576, MP526, and MP525 models represent a blend of advanced technology and user-friendly features designed to meet the needs of modern users.

The BenQ MP575 is renowned for its high brightness and excellent color accuracy, making it suitable for well-lit environments. With a brightness of 3000 ANSI lumens, users can expect clear and vibrant images, even in daylight. This model also incorporates BenQ's proprietary DLP technology, which enhances image sharpness and ensures long-lasting performance without color degradation.

Similarly, the BenQ MP525P presents itself as a versatile option with its lightweight design, making it ideal for on-the-go presentations. It offers a brightness of 2500 ANSI lumens and features a resolution of XGA (1024 x 768), ensuring that text and graphics are sharp and clear. It also supports various input sources, including HDMI, VGA, and USB, giving users flexibility in connectivity.

The BenQ MP576, another impressive model, is designed with enhanced networking capabilities, ideal for corporate environments where collaboration is key. This projector not only offers excellent image quality with a resolution of XGA but also includes features like LAN display, allowing multiple devices to connect wirelessly, thus simplifying the presentation process.

The MP526 mirrors some of the MP575's strengths while focusing on energy efficiency. It features a long lamp life of up to 5000 hours, which significantly reduces maintenance costs and ensures longer periods between lamp replacements. This characteristic is particularly appealing for organizations looking to minimize operational costs.

Last but not least, the BenQ MP525 boasts remarkable portability and ease of use, coupled with a quick start and shutdown feature. This projector is particularly suitable for educators and business professionals who require a reliable device that can be set up and packed away quickly.

All these models underscore BenQ's commitment to delivering high-quality projectors that cater to the needs of diverse users, with features designed to enhance the viewing experience, ensure reliable performance, and facilitate ease of use. Their combination of brightness, resolution, connectivity options, and portability makes them an excellent choice for anyone looking to invest in a projector for various applications.
Top Page Image Contents