BenQ MP575, MP576, MP525, MP515, MP526 manual Limited warranty, Copyright, Disclaimer

Page 66

Warranty and Copyright information

Limited warranty

BenQ warrants this product against any defects in material and workmanship, under normal usage and storage.

Proof of purchase date will be required with any warranty claim. In the event this product is found to be defective within the warranty period, BenQ's only obligation and your exclusive remedy shall be replacement of any defective parts (labor included). To obtain warranty service, immediately notify the dealer from which you purchased the product of any defects.

Important: The above warranty shall be void if the customer fails to operate the product in accordance with BenQ's written instructions, especially the ambient humidity must be in-between 10% and 90%, temperature in-between 0°C and 35°C, altitude lower than 4920 feet, and avoiding to operate the projector in a dusty environment. This warranty gives you specific legal rights, and you may have other rights which vary from country to country.

For other information, please visit www.BenQ.com.

Copyright

Copyright 2009 by BenQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of BenQ Corporation.

Disclaimer

BenQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Further, BenQ Corporation reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation to notify any person of such revision or changes.

*DLP, Digital Micromirror Device and DMD are trademarks of Texas Instruments. Others are copyrights of their respective companies or organizations.

66 Warranty and Copyright information

Image 66
Contents Welcome Table of contents Important safety instructions Safety InstructionsRefer servicing to qualified service personnel Safety Instructions Locations near fire alarms Installation Projector features IntroductionShipping contents Projector exterior view Front/upper sideRear/lower side Controls and functions ProjectorMode Selects an available picture setupMode/Enter Activates the selected On-Screen Display OSD menu itemFreeze Remote controlVolume + Digital Zoom +Timer On Remote control effective rangeReplacing the remote control battery Timer Set upPositioning your projector Choosing a locationAspect image in a Aspect display area Select your screen sizePositioning your projector Projection dimensions InchConnection Connecting a monitor Connecting a computer or monitorConnecting a computer To connect the projector to a notebook or desktop computerConnecting Video source devices Connecting audioConnecting a Component Video source device To connect the projector to a Component Video source deviceConnecting an S-Video/composite Video source device To connect the projector to an S-Video/Video source deviceOperation Starting up the projectorAdjusting the projected image Adjusting the projection angleAuto-adjusting the image Fine-tuning the image size and clarity Using the remote controlCorrecting keystone Using the menus Use / to highlight the System Setup Basic menuSetting a password Using a security cable lockUtilizing the password function To the Security SettingsEntering the password recall procedure If you forget the passwordChanging the password Confirm the new password by re-entering the new passwordDisabling the password function Switching input signal Selecting the aspect ratio Using the OSD menuMagnifying and searching for details Press Digital Zoom+/- to display the Zoom barAbout the aspect ratio Using Wall Color Selecting a picture modeOptimizing the image Fine-tuning the image quality in user modes Selecting a color temperature Adjusting SharpnessAdjusting Brilliant Color About color temperaturesTo adjust the settings Image immediatelyAt 0, only the saturation of pure red will be Affected Setting the presentation timer Selection DescriptionHow to use the Timer On key? You can set the blank time in the System Setup BasicHiding the image Utilizing FAQ function Freezing the imagePress Mode/Enter To activate the High Altitude Mode Operating in a high altitude environmentLocking control keys Turning off the Power On/Off Ring Tone Adjusting the soundAdjusting the sound level Personalizing the projector menu displayRow Configuring the Lan Control SettingsIf you are in a Dhcp environment If you are in a non-DHCP environmentMenu Exit Ii To switch input source, click on your desired signalControlling the projector remotely through a web browser Auto SourceIiii Iiiv Once the cooling process finishes, a Power Off Ring Shutting down the projectorMain menu Sub-menu Options Menu operationMenu system BasicAdvanced Informa Description of each menu Color Tint Color Temperature 3D Color Management Save SettingsTimer SharpnessBasic Blank Timer Menu SettingsAuto Power Off Sleep TimerSettings Audio Settings Standby Monitor OutLamp Settings Description Mute Off VolumeInstallation Reset AllFAQ-Image FAQ-FeaturesMaintenance Care of the projectorLamp information Getting to know the lamp hourExtending lamp life Timing of replacing the lamp Appears Lamp has been in operation equivalent toReplacing the lamp Page Tighten the screw that secures the lamp Resetting the lamp timerLamp time will be reset to Restart the projectorLamp events IndicatorsLight Status & Description Power events Thermal eventsTroubleshooting Specifications Dimensions Ceiling mount installationMm W x 110 mm H x 217 mm D Timing chart Supported timing for PC inputSupported timing for Component-YPbPrinput Supported timing for Video and S-Video inputsLimited warranty CopyrightDisclaimer EEC statement Regulation statementsFCC statement Weee directiveRegulation statements
Related manuals
Manual 68 pages 27 Kb

MP526, MP515, MP525, MP575, MP576 specifications

BenQ has established itself as a significant player in the projector market, offering a diverse range of models catering to various applications, from education to business and home entertainment. The BenQ MP575, MP525P, MP576, MP526, and MP525 models represent a blend of advanced technology and user-friendly features designed to meet the needs of modern users.

The BenQ MP575 is renowned for its high brightness and excellent color accuracy, making it suitable for well-lit environments. With a brightness of 3000 ANSI lumens, users can expect clear and vibrant images, even in daylight. This model also incorporates BenQ's proprietary DLP technology, which enhances image sharpness and ensures long-lasting performance without color degradation.

Similarly, the BenQ MP525P presents itself as a versatile option with its lightweight design, making it ideal for on-the-go presentations. It offers a brightness of 2500 ANSI lumens and features a resolution of XGA (1024 x 768), ensuring that text and graphics are sharp and clear. It also supports various input sources, including HDMI, VGA, and USB, giving users flexibility in connectivity.

The BenQ MP576, another impressive model, is designed with enhanced networking capabilities, ideal for corporate environments where collaboration is key. This projector not only offers excellent image quality with a resolution of XGA but also includes features like LAN display, allowing multiple devices to connect wirelessly, thus simplifying the presentation process.

The MP526 mirrors some of the MP575's strengths while focusing on energy efficiency. It features a long lamp life of up to 5000 hours, which significantly reduces maintenance costs and ensures longer periods between lamp replacements. This characteristic is particularly appealing for organizations looking to minimize operational costs.

Last but not least, the BenQ MP525 boasts remarkable portability and ease of use, coupled with a quick start and shutdown feature. This projector is particularly suitable for educators and business professionals who require a reliable device that can be set up and packed away quickly.

All these models underscore BenQ's commitment to delivering high-quality projectors that cater to the needs of diverse users, with features designed to enhance the viewing experience, ensure reliable performance, and facilitate ease of use. Their combination of brightness, resolution, connectivity options, and portability makes them an excellent choice for anyone looking to invest in a projector for various applications.