Digital Keystone Correction
Keystoning refers to the situation where the projected image is noticeably wider at either the top or bottom. It occurs when the projector is not perpendicular to the screen.
To correct this, besides adjusting the height of the projector, you will need to manually correct it follow- ing ONE of these steps.
1.Press 3 Left/ Right 4 (hot key) on the control panel of the projec-
tor to display the status bar labelled Keystone. Press 3 Left to correct
keystoning at the top of the image. Press Right 4to correct keystoning at the bottom of the image.
2.Press 
/ 
on the remote control to display the status bar
labelled Keystone, then press 
to correct keystoning at the top of
the image or press 
to correct keystoning at the bottom of the image.
3. Press 6 Menu on the projector or Menu on the remote control. Go to | Picture |
For example,
1.Press 3 Left on the projector or
2.Press 
on the remote control or
3.Press 3 Left on the projector or 3 on the remote control when you are in Picture
Keystone |
|
| 0 | Keystone |
1.Press Right 4 on the projector or
2.Press 
on the remote control or
3.Press Right 4 on the projector or 4 on
the remote control when you are in Picture -
Keystone |
|
| 0 | Keystone |
+6
20 Operation