BenQ PE5120 Connecting various equipment, Connecting video inputs, Connecting a computer

Page 14

Connecting various equipment

When connecting any signal source to the projector, be sure to:

1.Turn off all equipment before making any connections.

2.Use the correct signal cable for each source.

3.Ensure the cables are firmly inserted.

4.Connect all audio signals to external speakers. This projector is not equipped with speakers.

In the connections shown below, only certain cables are included in the standard package. If you need other cables, please contact your place of purchase or nearby electronics stores.

Connecting video inputs

Connecting component-video devices

Component Video cable (optional accessory)

Game player

AV equipment

From audio output

To audio input

 

 

 

 

 

 

terminals

terminals

 

 

 

Component Video cable (optional accessory)

Connecting S-video or video device

S-Video or video device

Composite

Video

cable

From audio output

To audio input

terminals

terminals

S-Video cable

 

If the selected video image is not displayed after the projector is turned on and the correct video source has been selected, please check that the video source is turned on and operating correctly. Also check that the signal cables have been connected correctly.

Connecting a computer

From audio output

To audio input

terminals

terminals

VGA-DVI cable

14 Connecting various equipment

Image 14
Contents Welcome Copyright DisclaimerTable of Contents Using the on-screen display menus Additional informationFCC statement for U.S. users Safety, regulatory and legal informationSafety instructions EEC statement for European usersDisposal Avoid using volatile liquidsMoisture condensation Overview FeaturesAccessories Projector exterior viewRear side Rear connector panelFront adjuster foot Lamp door Rear adjuster feet Bottom sideProjector Remote controlControls and functions Default Replacing the batteries in the remote controlPreset Refer to page 17 for more information Aspect buttonsPositioning your projector Choosing a locationObtaining a preferred projected image size Ceiling installation for a 169 ratio screenWidescreen ratio screen dimension table Type inch Height cm Width cm Min. cmWide Inch Standard ratio screen dimension tableType Height Width Min Connecting a computer Connecting various equipmentConnecting video inputs Connecting component-video devicesSwitching input signals Using the projector and remote controlTurning the power on Adjusting the imageAuto-adjusting the image Correcting Keystone picture distortionDVI-A / DVI-D Video input Optimizing the imagePersonalizing the projector menu display Component Video / RCA Analog Video / S-Video inputTurning the power off Power indicator light flashes and the lamp shutsMenu structure Using the on-screen display menusHow to use the on-screen display menus Picture menu Dark areas is visibleAdvance menu Setting menuPro-picture menu Information menuReplacing the lamp Contact your BenQ dealer for assistance Additional informationCare of the projector Resetting the lamp counter Move the latch to another end as shown in the pictureWhen the projector is in a normal state Indicator lightsService information When the projector is in an abnormal stateOrdering spare parts or getting information TroubleshootingOptional accessories Optical characteristics SpecificationsDimensions General characteristics