BenQ PE5120 user manual Controls and functions, Projector, Remote control

Controls and functions

Projector

	13
	12
	10
9	11
5
3	4
1
	7
2
	8
6

1.Power (Refer to pages 15 and 18 for more information.)

Turns the projector on or off.

2.Source (Refer to page 15 for more information.)

Sequentially selects the input signal Component Video, DVI-D, Video, S-Video or DVI-A.

3.3 Left

4.Right 4

When the on-screen menu is not activated, #3 and #4 function as Keystone -/+hot keys.

5.5Exit

Exits and saves the menu settings.

6.6Menu

Turns the on-screen menu on.

When the on-screen menu is activated, the #3 to #6 buttons are used as directional arrows to select the desired menu items and to make adjustments.

Refer to page 19 for more information.

Remote control

Notes on remote control operation

7.Auto (Refer to page 16 for more infor- mation.)

Automatically determines the best picture timings for the displayed image.

8.Preset (Refer to page 17 for more infor- mation.)

Selects one of the preset modes to suit your program type.

9.Power indicator light (Refer to page 24 for more information.)

Lights up or flashes when the projector is under operation.

10.Temperature warning light (Refer to page 24 for more information.)

Lights up if the projector’s temperature becomes too high.

11.Lamp indicator light (Refer to page 24 for more information.)

Indicates the status of the lamp. Lights up when the lamp has developed a problem.

12.Zoom ring (Refer to page 16 for more information.)

Adjusts the size of the image.

13.Focus ring (Refer to page 16 for more information.)

Adjusts the focus of the projected image.

Make sure that there is nothing between the remote control and the IR sensors on the projector that might obstruct the infrared beam.

The effective range of the remote control is up to 8 meters from the front of the projector or 8 meters from the rear of the projector. The remote control must be held at an angle within 22.5 degrees of the projector’s IR remote control sensor.

8 m

Overview 9