English
To adjust the settings:
1.Go to the PICTURE: Advanced menu and highlight 3D Color Management.
2.Press MODE/ENTER and the 3D Color Management page displays.
3.Highlight Primary color and press 
/ 
to select a color from among Red, Green, Blue, Cyan, Magenta and Yellow.
4.Press 
to highlight Hue and press 
/ 
to select its range. Increase in the range will include colors consisted of more proportions of its two adjacent colors.
Please refer to the illustration to the right for how the colors relate to each other.
For example, if you select Red and set its
| range at 0, only pure red in the projected | RED | Yellow | GREEN | |
|
| ||||
| picture will be selected. Increasing its range |
|
|
| |
| will include red close to yellow and red close |
|
| ||
| to magenta. | Magenta |
| Cyan | |
5. | Press | to highlight Saturation and adjust |
| ||
|
|
| |||
| its values to your preference by pressing | / | BLUE |
| |
| . Every adjustment made will reflect to the |
| |||
|
|
| |||
image immediately.
For example, if you select Red and set its
value at 0, only the saturation of pure red will be affected.
6.Press 
to highlight Gain and adjust its values to your preference by pressing 
/
. The contrast level of the primary color you select will be affected. Every adjustment made will reflect to the image immediately.
7.Repeat steps 3 to 6 for other color adjustments.
8.Make sure you have made all of the desired adjustments.
9.Press MENU/EXIT to exit and save the settings.
Saturation is the amount of that color in a video picture. Lower settings produce less saturated colors; a setting of “0” removes that color from the image entirely. If the saturation is too high, that color will be overpowering and unrealistic.
Selecting Color Space Conversion
Highlight Color Space Conversion in the PICTURE: Advanced menu and select by
pressing /
on the projector or remote control.
Select an appropriate color matrix type from among Auto/RGB/STDV/HDTV.
This function is only available with HDMI input source.
Selecting a Video Format
Highlight Video Format in the PICTURE: Advanced menu and select by pressing 
/ 
on the projector or remote control.
Select an appropriate video standard from among Auto/NTSC/NTSC3.58/NTSC4.43/PAL/
In the normal condition, select Auto and the projector will automatically detect the video standard. When the projector has difficulty detecting the video standard, select the appropriate video standard from the menu.
This function is only available with Video and
38 Operation