Connecting Floppy-to-Parallel Adapter Cable

Chapter 1

Setting Up the EnCore 420

Utility (J5)

Serial 1 (J3)

Floppy/Parallel (J4)

Floppy/Parallel

Cable to (J4)

Floppy-to-Parallel Adapter Cable

Floppy B

Floppy A (Typical)

CM420QKS_11a

	Figure 1-4. Connecting Floppy-to-Parallel Adapter Cable
5) Connect Utility cable	The Utility cable is connected to the Utility connector (J5).
	See Figures 1-1, 1-2, and 1-5.

6)	Connect Serial cables	The serial cables are connected to the respective Serial ports (J3, J9,
		J13, and J14). See Figures 1-1, 1-2, and 1-5.
		All four serial ports use the same type cable for each port (vertical or
		right angel).
7)	Connect Ethernet cable	The Ethernet cable is connected to the Ethernet connector (J2).
		See Figures 1-1, 1-2, and 1-5.

8) Connect USB cable

The USB cable is connected to the USB connector (J10). See Figures 1-1, 1-2, and 1-5.

9) Connect RTC Battery

The RTC battery and its cable are connected to the Utility cable connector to power the RTC. See Figures 1-5 and 1-6.

CoreModule 420

QuickStart Guide

Figure 1-4. Connecting Floppy-to-Parallel Adapter Cable