Onkyo HT-RC330 Level Cal Level Calibration, Audio Adjust, Multiplex/Mono Settings, Dolby Settings

Page 32

Level Cal (Level Calibration)

Menu

Level Cal

Here you can adjust the level of each speaker with the built-in test tone so that the volume of each speaker is the same at the listening position.

■Left, Center*1, Right, Surround Right, Surround

Left

`–12 dB to 0 dB to +12 dB in 1 dB step.

■Subwoofer*1

`–15 dB to 0 dB to +12 dB in 1 dB step.

Note

•Speakers that you set to “No” or “None” in the “Sp Config (Speaker Configuration)” (➔ page 31) cannot be selected.

•These settings cannot be calibrated in either of the following cases:

–a pair of headphones is connected.

–Speakers B is on.

–Speakers A is off.

–the “Audio TV Out” setting is set to “On” (➔ page 35).

–“HDMI Ctrl (RIHD)” is set to “On” (➔ page 35) and you’re listening through your TV speakers.

–the AV receiver is muted.

*1 For the center speaker and subwoofer, the level settings made by using HOME are saved here as the default settings.

Tip

•If you’re using a handheld sound level meter, adjust the level of each speaker so that it reads 75 dB SPL at the listening position, measured with C-weighting and slow reading.

Audio Adjust

Menu

Audio Adjust

With the Audio Adjust functions and settings, you can adjust the sound and listening modes as you like.

Multiplex/Mono Settings

■Multiplex Input Ch (Mux)

`Main

`Sub

`Main/Sub

This setting determines which channel of a stereo multiplex source is output. Use it to select audio channels or languages with multiplex sources, multilingual TV broadcasts, and so on.

■Mono

Input Ch (Mono)

`Left + Right

`Left

`Right

This setting specifies the channel to be used for playing any 2-channel digital source such as Dolby Digital, or 2- channel analog/PCM source in the Mono listening mode.

En

Dolby Settings

■PLII Music (2ch Input)

These settings apply to only 2-channel stereo sources.

Panorama

`On

`Off

Turn this setting on to broaden the width of the front stereo image when using the Dolby Pro Logic II Music listening mode.

Dimension

`–3to 0 to +3

With this setting, you can move the sound field forward or backward when using the Dolby Pro Logic II Music listening mode. Higher settings move the sound field backward. Lower settings move it forward.

If the stereo image feels too wide, or there’s too much surround sound, move the sound field forward to improve the balance. Conversely, if the stereo image feels like it’s in mono, or there’s not enough surround sound, move it backward.

Center Width

`0 to 3 to 7

With this setting, you can adjust the width of the sound from the center speaker when using the Dolby Pro Logic

IIMusic listening mode. Normally, if you’re using a center speaker, the center channel sound is output from only the center speaker. (If you’re not using a center speaker, the center channel sound will be distributed to the front left and right speakers to create a phantom center). This setting controls the front left, right, and center mix, allowing you to adjust the weight of the center channel sound.

DTS Setting

■Neo:6 Music Center Image

`0 to 2 to 5

With this setting, you can specify by how much the front left and right channel output is attenuated in order to create the center channel.

Setting a value “0” in the middle is set to hear a sound. Sound is spread in left and right (the outside) so that the set value is made big. Please adjust by liking.

32

Page 31 Page 33
Image 32
Page 31 Page 33
Contents HT-RC330 Local regulations when disposing of batteries Temperature protection operates if the apparatusAttain an abnormal high temperature 10 cm 4 at the rear. The rear edge of the shelf orPrecautions Supplied Accessories Make sure you have the following accessoriesInstalling the batteries Aiming the remote controllerContents Features AmplifierProcessing MiscellaneousListening Mode buttons Memory button Tuning Mode button Display buttonFront & Rear Panels Front PanelPower cord Remote Control jackDisplay Rear PanelRemote Controller Controlling the AV ReceiverConnecting the AV Receiver Connecting Your SpeakersConnecting the Speaker Cables Push-type speaker terminalsSpeaker Configuration Speaker Connection PrecautionsUsing a Powered Subwoofer Attaching the Speaker Cable LabelsAbout AV Connections Connected image with AV componentsAV Cables and Jacks Hdmi cableJack Components Assignable Connecting Components with HdmiAudio return channel ARC function See Recording to make a connection for video recording Connecting Your ComponentsHow to record the video Connecting Onkyo uComponents Connecting a Recording ComponentSystem On/Auto Power On Remote ControlConnecting Antenna Connecting the Power CordPlug the power cord into an AC wall outlet Assembling the AM loop antennaSee Auto Standby about a power management setting Turning On/Off the AV ReceiverTurning On Turning OffPlaying the Connected Component Controlling Contents of USB DevicesPlayback Standard Mode control Extended Mode controlUnderstanding Icons on the Display Playing iPod/iPhone via USBUsing the Tuner Tuning into Radio StationsAuto tuning mode Playing USB DevicePresetting AM/FM Stations Using RDS excluding North American modelsListening to Traffic News TP Displaying Radio Text RTFinding Stations by Type PTY Using Basic Functions Using the Listening ModesSelecting Listening Modes About Listening ModesListening Modes Speaker LayoutOnkyo-Original DSP Listening Modes Listening modes cannot be selected with some source formats Using the Home Menu Selecting Speakers a and B Using the Sleep TimerSetting the Display Brightness Using the Music OptimizerDisplaying Source Information Changing the Input DisplayUsing Headphones Muting the AV ReceiverRecording AV RecordingCommon Procedures in Setup Menu Advanced SetupOn-screen Setup Menus Hdmi Input Component Component Video InputDigital Audio Digital Audio Input Explanatory NotesSp Config Speaker Configuration Sp Distance Speaker DistanceAudio Adjust Multiplex/Mono SettingsDolby Settings DTS SettingSource Setup Theater-Dimensional SettingSync Audio SelectorHardware Hdmi Setup Hdmi Ctrl RihdHdmi Through Audio TV OutUsing the Audio Settings Tone Control SettingsSpeaker Levels Late Night FunctionMusic Optimizer CinemaFILTERMusic Optimizer Cinema FilterControlling Your iPod/iPhone Using the Onkyo DockIPod/iPhone Playback via Onkyo Dock Available buttons Preprogrammed Remote Control Codes Entering Remote Control CodesRemote Control Codes for Onkyo Components Connected via u Controlling Other Onkyo ComponentsResetting Remote Mode Buttons Resetting the Remote ControllerControlling Other Components Controlling a Blu-ray Disc/DVD Player, HDDisc + Components Buttons DVDplayerCassettetape deck Troubleshooting Can’t turn on the AV receiverAV receiver turns off unexpectedly There’s no sound, or it’s very quietThere’s no sound with a certain signal format Speaker volume cannot be set as requiredAbout DTS signals Only the front speakers produce soundRemote controller doesn’t work Can’t access the music files on a USB deviceStandby power consumption Sound changes when I connect my headphonesVideo Atton Gain is reduced by 2 dB Video Attoff defaultVideo Attenuation Audio Connection Formats Connection Tips and Video Signal PathVideo Connection Formats USB Features USB Device RequirementsAbout Copyright Protection About HdmiSupported Audio Formats Operations that can be performed with Connection Using an RIHD-compatible TV, Player, or RecorderAbout p-compatible components How to connect and setup Confirm the connecting and settingConfirm the settings Operate with the remote controllerSpecifications Amplifier SectionVideo Section Tuner SectionMemo Memo Memo Onkyo Europe Electronics GmbH Onkyo Europe Electronics GmbH UK Branch

HT-RC330 specifications

The Onkyo HT-RC330 is a notable home theater receiver designed to cater to the needs of audiophiles and home entertainment enthusiasts. This versatile receiver showcases a host of features and technologies that ensure a comprehensive and immersive audio-visual experience.

At the heart of the HT-RC330 is its impressive Audyssey technology, which includes Audyssey MultEQ. This feature allows for optimal room acoustics by automatically calibrating the sound output to match the specific characteristics of your listening environment. This means that whether you're watching a movie, playing a game, or listening to music, you get the best possible sound quality tailored to your room.

The receiver supports a 7.1 channel surround sound system, delivering rich and engaging audio that envelops the listener. It has a robust power output, providing sufficient amplification to drive various speaker setups, ensuring that you can enjoy loud and clear sound without distortion.

Connectivity is a strong suit of the HT-RC330. It offers multiple HDMI inputs, allowing users to connect various devices, such as Blu-ray players, gaming consoles, and streaming devices, all while ensuring high-definition audio and video signals are transmitted without loss. Additionally, the receiver supports 3D video and 4K pass-through, making it future-proof and ready for the latest high-definition formats.

Another standout feature is its support for an array of audio formats, including Dolby TrueHD and DTS-HD Master Audio. This capability allows users to enjoy high-resolution audio tracks with crisp clarity and impactful bass. The receiver also features an integrated AM/FM tuner, providing access to radio broadcasts.

The HT-RC330 provides advanced customization options, thanks to its user-friendly on-screen setup and remote control. Users can easily navigate through settings and create personalized sound profiles for different media types.

Moreover, it comes equipped with Onkyo's Zone 2 feature, which lets users extend audio enjoyment to another room, making it a perfect choice for those who want multi-room audio capabilities.

In summary, the Onkyo HT-RC330 is a powerful and feature-rich home theater receiver that combines cutting-edge audio technologies with flexible connectivity options, making it an excellent choice for enhancing your home entertainment experience. Whether for movies, music, or games, the HT-RC330 aims to deliver unparalleled sound quality.
Top Page Image Contents