Onkyo HT-RC330 Video Attenuation, Video Attoff default, Video Atton Gain is reduced by 2 dB

Page 46

■The following settings can be made for the composite video inputs

You must use the buttons on the unit to make these settings.

On the AV receiver, press the input selector for the input source that you want to set and the SETUP button simultaneously. While holding down the input selector button, press SETUP until “Video ATT:ON” appears on the display. Then, release both buttons. To reactivate the setting, repeat the above process so that “Video ATT:OFF” appears on the display, and release the buttons.

• Video Attenuation

This setting can be made for the BD/DVD, VCR/DVR, CBL/SAT, GAME, or AUX input.

If you have a games console connected to the composite video input, and the picture isn’t very clear, you can attenuate the gain.

Video ATT:OFF: (default).

Video ATT:ON: Gain is reduced by 2 dB.

■If the picture on your TV/monitor connected to HDMI OUT is unstable, try switching the DeepColor function off

To turn off the DeepColor function, simultaneously press the CBL/SAT and 8ON/STANDBY buttons on the AV receiver. While holding down CBL/SAT, press 8ON/STANDBY until “Off” appears on the display. Then, release both buttons. To reactivate the DeepColor function, repeat the above process until “On” appears on the display and release the buttons.

The AV receiver contains a microcomputer for signal processing and control functions. In very rare situations, severe interference, noise from an external source, or static electricity may cause it to lockup. In the unlikely event that this happens, unplug the power cord from the wall outlet, wait at least five seconds, and then plug it back in again.

Onkyo is not responsible for damages (such as CD rental fees) due to unsuccessful recordings caused by the unit’s malfunction. Before you record important data, make sure that the material will be recorded correctly.

Before disconnecting the power cord from the wall outlet, set the AV receiver to Standby.

En

46

Page 45 Page 47
Image 46
Page 45 Page 47
Contents HT-RC330 Attain an abnormal high temperature Local regulations when disposing of batteriesTemperature protection operates if the apparatus 10 cm 4 at the rear. The rear edge of the shelf orPrecautions Installing the batteries Supplied AccessoriesMake sure you have the following accessories Aiming the remote controllerContents Processing FeaturesAmplifier MiscellaneousFront & Rear Panels Listening Mode buttonsMemory button Tuning Mode button Display button Front PanelDisplay Power cordRemote Control jack Rear PanelRemote Controller Controlling the AV ReceiverConnecting the Speaker Cables Connecting the AV ReceiverConnecting Your Speakers Push-type speaker terminalsUsing a Powered Subwoofer Speaker ConfigurationSpeaker Connection Precautions Attaching the Speaker Cable LabelsAV Cables and Jacks About AV ConnectionsConnected image with AV components Hdmi cableAudio return channel ARC function Connecting Components with HdmiJack Components Assignable How to record the video Connecting Your ComponentsSee Recording to make a connection for video recording System On/Auto Power On Connecting Onkyo uComponentsConnecting a Recording Component Remote ControlPlug the power cord into an AC wall outlet Connecting AntennaConnecting the Power Cord Assembling the AM loop antennaTurning On See Auto Standby about a power management settingTurning On/Off the AV Receiver Turning OffPlayback Controlling Contents of USB DevicesPlaying the Connected Component Understanding Icons on the Display Standard Mode controlExtended Mode control Playing iPod/iPhone via USBAuto tuning mode Using the TunerTuning into Radio Stations Playing USB DevicePresetting AM/FM Stations Using RDS excluding North American modelsFinding Stations by Type PTY Displaying Radio Text RTListening to Traffic News TP Selecting Listening Modes Using Basic FunctionsUsing the Listening Modes About Listening ModesOnkyo-Original DSP Listening Modes Speaker LayoutListening Modes Listening modes cannot be selected with some source formats Using the Home Menu Selecting Speakers a and B Using the Sleep TimerDisplaying Source Information Setting the Display BrightnessUsing the Music Optimizer Changing the Input DisplayRecording Using HeadphonesMuting the AV Receiver AV RecordingOn-screen Setup Menus Advanced SetupCommon Procedures in Setup Menu Digital Audio Digital Audio Input Hdmi InputComponent Component Video Input Explanatory NotesSp Config Speaker Configuration Sp Distance Speaker DistanceDolby Settings Audio AdjustMultiplex/Mono Settings DTS SettingSync Source SetupTheater-Dimensional Setting Audio SelectorHardware Hdmi Through Hdmi SetupHdmi Ctrl Rihd Audio TV OutSpeaker Levels Using the Audio SettingsTone Control Settings Late Night FunctionMusic Optimizer Music OptimizerCinemaFILTER Cinema FilterIPod/iPhone Playback via Onkyo Dock Using the Onkyo DockControlling Your iPod/iPhone Available buttons Remote Control Codes for Onkyo Components Connected via u Preprogrammed Remote Control CodesEntering Remote Control Codes Controlling Other Onkyo ComponentsControlling Other Components Resetting Remote Mode ButtonsResetting the Remote Controller Controlling a Blu-ray Disc/DVD Player, HDCassettetape deck Components Buttons DVDplayerDisc + AV receiver turns off unexpectedly TroubleshootingCan’t turn on the AV receiver There’s no sound, or it’s very quietAbout DTS signals There’s no sound with a certain signal formatSpeaker volume cannot be set as required Only the front speakers produce soundStandby power consumption Remote controller doesn’t workCan’t access the music files on a USB device Sound changes when I connect my headphonesVideo Attenuation Video Attoff defaultVideo Atton Gain is reduced by 2 dB Video Connection Formats Connection Tips and Video Signal PathAudio Connection Formats USB Features USB Device RequirementsSupported Audio Formats About HdmiAbout Copyright Protection About p-compatible components Using an RIHD-compatible TV, Player, or RecorderOperations that can be performed with Connection Confirm the settings How to connect and setupConfirm the connecting and setting Operate with the remote controllerVideo Section SpecificationsAmplifier Section Tuner SectionMemo Memo Memo Onkyo Europe Electronics GmbH Onkyo Europe Electronics GmbH UK Branch

HT-RC330 specifications

The Onkyo HT-RC330 is a notable home theater receiver designed to cater to the needs of audiophiles and home entertainment enthusiasts. This versatile receiver showcases a host of features and technologies that ensure a comprehensive and immersive audio-visual experience.

At the heart of the HT-RC330 is its impressive Audyssey technology, which includes Audyssey MultEQ. This feature allows for optimal room acoustics by automatically calibrating the sound output to match the specific characteristics of your listening environment. This means that whether you're watching a movie, playing a game, or listening to music, you get the best possible sound quality tailored to your room.

The receiver supports a 7.1 channel surround sound system, delivering rich and engaging audio that envelops the listener. It has a robust power output, providing sufficient amplification to drive various speaker setups, ensuring that you can enjoy loud and clear sound without distortion.

Connectivity is a strong suit of the HT-RC330. It offers multiple HDMI inputs, allowing users to connect various devices, such as Blu-ray players, gaming consoles, and streaming devices, all while ensuring high-definition audio and video signals are transmitted without loss. Additionally, the receiver supports 3D video and 4K pass-through, making it future-proof and ready for the latest high-definition formats.

Another standout feature is its support for an array of audio formats, including Dolby TrueHD and DTS-HD Master Audio. This capability allows users to enjoy high-resolution audio tracks with crisp clarity and impactful bass. The receiver also features an integrated AM/FM tuner, providing access to radio broadcasts.

The HT-RC330 provides advanced customization options, thanks to its user-friendly on-screen setup and remote control. Users can easily navigate through settings and create personalized sound profiles for different media types.

Moreover, it comes equipped with Onkyo's Zone 2 feature, which lets users extend audio enjoyment to another room, making it a perfect choice for those who want multi-room audio capabilities.

In summary, the Onkyo HT-RC330 is a powerful and feature-rich home theater receiver that combines cutting-edge audio technologies with flexible connectivity options, making it an excellent choice for enhancing your home entertainment experience. Whether for movies, music, or games, the HT-RC330 aims to deliver unparalleled sound quality.
Top Page Image Contents