Onkyo HT-RC330 Specifications, Amplifier Section, Video Section, Tuner Section, General

Page 52

Specifications

Amplifier Section

Rated Output Power

All channels: (North American)

60 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven from 20 Hz to 20 kHz, with a maximum total harmonic distortion of 0.7% (FTC) 90 watts minimum continuous power per channel, 6 ohm loads, 2 channels driven at 1 kHz, with a maximum total harmonic distortion of 0.9% (FTC)

(Chinese)

1 ch ⋅ 100 W at 6 ohms, 1 kHz, 1 ch driven of 1% (IEC)

Maximum Effective Output Power

(Chinese)

1 ch ⋅ 120 W at 6 ohms, 1 kHz, 1 ch driven (JEITA)

Dynamic Power*

*IEC60268-Short-term maximum output power

 

160 W (3 Ω, Front)

 

125 W (4 Ω, Front)

 

85 W (8 Ω, Front)

THD+N (Total Harmonic Distortion+Noise)

 

0.08% (20 Hz - 20 kHz, half power)

Damping Factor

60 (Front, 1 kHz, 8 Ω)

Input Sensitivity and Impedance (Unbalance)

200 mV/47 kΩ (LINE)

Rated RCA Output Level and Impedance

200 mV/2.2 kΩ (REC OUT)

Maximum RCA Output Level and Impedance 2 V/2.2 kΩ (REC OUT)

Frequency Response 20 Hz - 50 kHz/+1 dB, -3 dB (DSP bypass)

Tone Control Characteristics

 

±10 dB, 50 Hz (BASS)

 

±10 dB, 20 kHz (TREBLE)

Signal to Noise Ratio

100 dB (LINE, IHF-A)

Speaker Impedance

6 Ω - 16 Ω

Video Section

Input Sensitivity/Output Level and Impedance

1 Vp-p/75 Ω (Component Y)

0.7Vp-p/75 Ω (Component PB/CB, PR/CR) 1 Vp-p/75 Ω (Composite)

Component Video Frequency Response

5 Hz - 100 MHz/+0 dB, -3 dB

Tuner Section

FM Tuning Frequency Range

(North American)

87.5MHz - 107.9 MHz

(Chinese)

87.5MHz - 108.0 MHz, RDS

AM Tuning Frequency Range

 

522/530 kHz - 1611/1710 kHz

Preset Channel

40

General

Power Supply

(North American) AC 120 V, 60 Hz

 

(Chinese) AC 220 - 240 V, 50/60 Hz

Power Consumption

(North American) 3.3 A

 

(Chinese) 330 W

Stand-by Power Consumption

 

(North American) 0.2 W

 

(Chinese) 0.3 W

Dimensions

435 mm ⋅ 150 mm ⋅ 328 mm

(W ⋅ H ⋅ D)

17-1/8" ⋅ 5-7/8" ⋅ 12-15/16"

Weight

7.5 kg (16.5 lbs.)

■ HDMI

 

Input

IN 1, IN 2, IN 3

Output

OUT

Video Resolution

1080p

Audio Format

Dolby TrueHD, DTS Master Audio,

 

DVD-Audio, DSD

Supported

3D, Audio Return Channel, DeepColor,

 

x.v.Color, LipSync, CEC (RIHD)

■ Video Inputs

 

Component

IN 1, IN 2

Composite

BD/DVD, VCR/DVR, CBL/SAT, GAME,

 

AUX

■ Video Outputs

 

Component

OUT

Composite

MONITOR OUT, VCR/DVR OUT

■ Audio Inputs

 

Digital

Optical: 2

 

Coaxial: 1

Analog

BD/DVD, VCR/DVR, CBL/SAT, GAME,

 

TV/CD, AUX

■ Audio Outputs

 

Analog

VCR/DVR

Subwoofer Pre Output

 

 

1

Speaker Outputs

SP-A (L, R, C, SL, SR) + SP-B (L, R)

Phones

1 (6.3 ø)

■ Others

 

USB

1 (Front)

RI

1

Specifications and features are subject to change without notice.

En

52

Page 51 Page 53
Image 52
Page 51 Page 53
Contents HT-RC330 Local regulations when disposing of batteries Temperature protection operates if the apparatusAttain an abnormal high temperature 10 cm 4 at the rear. The rear edge of the shelf orPrecautions Supplied Accessories Make sure you have the following accessoriesInstalling the batteries Aiming the remote controllerContents Features AmplifierProcessing MiscellaneousListening Mode buttons Memory button Tuning Mode button Display buttonFront & Rear Panels Front PanelPower cord Remote Control jackDisplay Rear PanelRemote Controller Controlling the AV ReceiverConnecting the AV Receiver Connecting Your SpeakersConnecting the Speaker Cables Push-type speaker terminalsSpeaker Configuration Speaker Connection PrecautionsUsing a Powered Subwoofer Attaching the Speaker Cable LabelsAbout AV Connections Connected image with AV componentsAV Cables and Jacks Hdmi cableAudio return channel ARC function Connecting Components with HdmiJack Components Assignable How to record the video Connecting Your ComponentsSee Recording to make a connection for video recording Connecting Onkyo uComponents Connecting a Recording ComponentSystem On/Auto Power On Remote ControlConnecting Antenna Connecting the Power CordPlug the power cord into an AC wall outlet Assembling the AM loop antennaSee Auto Standby about a power management setting Turning On/Off the AV ReceiverTurning On Turning OffPlayback Controlling Contents of USB DevicesPlaying the Connected Component Standard Mode control Extended Mode controlUnderstanding Icons on the Display Playing iPod/iPhone via USBUsing the Tuner Tuning into Radio StationsAuto tuning mode Playing USB DevicePresetting AM/FM Stations Using RDS excluding North American modelsFinding Stations by Type PTY Displaying Radio Text RTListening to Traffic News TP Using Basic Functions Using the Listening ModesSelecting Listening Modes About Listening ModesOnkyo-Original DSP Listening Modes Speaker LayoutListening Modes Listening modes cannot be selected with some source formats Using the Home Menu Selecting Speakers a and B Using the Sleep TimerSetting the Display Brightness Using the Music OptimizerDisplaying Source Information Changing the Input DisplayUsing Headphones Muting the AV ReceiverRecording AV RecordingOn-screen Setup Menus Advanced SetupCommon Procedures in Setup Menu Hdmi Input Component Component Video InputDigital Audio Digital Audio Input Explanatory NotesSp Config Speaker Configuration Sp Distance Speaker DistanceAudio Adjust Multiplex/Mono SettingsDolby Settings DTS SettingSource Setup Theater-Dimensional SettingSync Audio SelectorHardware Hdmi Setup Hdmi Ctrl RihdHdmi Through Audio TV OutUsing the Audio Settings Tone Control SettingsSpeaker Levels Late Night FunctionMusic Optimizer CinemaFILTERMusic Optimizer Cinema FilterIPod/iPhone Playback via Onkyo Dock Using the Onkyo DockControlling Your iPod/iPhone Available buttons Preprogrammed Remote Control Codes Entering Remote Control CodesRemote Control Codes for Onkyo Components Connected via u Controlling Other Onkyo ComponentsResetting Remote Mode Buttons Resetting the Remote ControllerControlling Other Components Controlling a Blu-ray Disc/DVD Player, HDCassettetape deck Components Buttons DVDplayerDisc + Troubleshooting Can’t turn on the AV receiverAV receiver turns off unexpectedly There’s no sound, or it’s very quietThere’s no sound with a certain signal format Speaker volume cannot be set as requiredAbout DTS signals Only the front speakers produce soundRemote controller doesn’t work Can’t access the music files on a USB deviceStandby power consumption Sound changes when I connect my headphonesVideo Attenuation Video Attoff defaultVideo Atton Gain is reduced by 2 dB Video Connection Formats Connection Tips and Video Signal PathAudio Connection Formats USB Features USB Device RequirementsSupported Audio Formats About HdmiAbout Copyright Protection About p-compatible components Using an RIHD-compatible TV, Player, or RecorderOperations that can be performed with Connection How to connect and setup Confirm the connecting and settingConfirm the settings Operate with the remote controllerSpecifications Amplifier SectionVideo Section Tuner SectionMemo Memo Memo Onkyo Europe Electronics GmbH Onkyo Europe Electronics GmbH UK Branch

HT-RC330 specifications

The Onkyo HT-RC330 is a notable home theater receiver designed to cater to the needs of audiophiles and home entertainment enthusiasts. This versatile receiver showcases a host of features and technologies that ensure a comprehensive and immersive audio-visual experience.

At the heart of the HT-RC330 is its impressive Audyssey technology, which includes Audyssey MultEQ. This feature allows for optimal room acoustics by automatically calibrating the sound output to match the specific characteristics of your listening environment. This means that whether you're watching a movie, playing a game, or listening to music, you get the best possible sound quality tailored to your room.

The receiver supports a 7.1 channel surround sound system, delivering rich and engaging audio that envelops the listener. It has a robust power output, providing sufficient amplification to drive various speaker setups, ensuring that you can enjoy loud and clear sound without distortion.

Connectivity is a strong suit of the HT-RC330. It offers multiple HDMI inputs, allowing users to connect various devices, such as Blu-ray players, gaming consoles, and streaming devices, all while ensuring high-definition audio and video signals are transmitted without loss. Additionally, the receiver supports 3D video and 4K pass-through, making it future-proof and ready for the latest high-definition formats.

Another standout feature is its support for an array of audio formats, including Dolby TrueHD and DTS-HD Master Audio. This capability allows users to enjoy high-resolution audio tracks with crisp clarity and impactful bass. The receiver also features an integrated AM/FM tuner, providing access to radio broadcasts.

The HT-RC330 provides advanced customization options, thanks to its user-friendly on-screen setup and remote control. Users can easily navigate through settings and create personalized sound profiles for different media types.

Moreover, it comes equipped with Onkyo's Zone 2 feature, which lets users extend audio enjoyment to another room, making it a perfect choice for those who want multi-room audio capabilities.

In summary, the Onkyo HT-RC330 is a powerful and feature-rich home theater receiver that combines cutting-edge audio technologies with flexible connectivity options, making it an excellent choice for enhancing your home entertainment experience. Whether for movies, music, or games, the HT-RC330 aims to deliver unparalleled sound quality.
Top Page Image Contents