include support format with frequency and auto detected functional will be workable.
4-7 Calibration
1. PC Calibration
Procedure | - Test equipment: video generator | |
| - Once Main Board is changed. PC Calibration | |
| should be done as well. | |
| (1) | Test signal analog: 1024 x 768 @60Hz |
| (2) | Test Pattern: White (up) Black (down) |
| - Note | |
| (1) | Calibration pattern should be in full screen |
|
| mode. |
| (2) | Please press "Power", "Left", "Left" and "Menu" |
|
| buttons sequentially to get into Service Mode. |
| (3) | Choose "Analog Settings", press "Menu" button |
|
| to access "PC Calibration" for correction in |
|
| Service Mode. Choose "Exit" to leave the |
|
| Service Mode. |
Check pattern | - Test signal: 1024 x 768 @60Hz | |
| - Test pattern: In focus II or 64 gray RGBW | |
| * After finishing ADC adjustment, check 64 gray | |
| RGBW pattern. | |
Inspection item | - Color saturation | |
Criteria | - There should not have any lack of RGBW. The | |
| color should appear normal and sort in right order. | |
-Color levels should be sufficient and normal. (the unidentified color levels on both left and right sides should not over 8 color levels.)
2.Video Calibration
Procedure | - Test equipment: video generator | |
| - Once Main Board is changed. Video Calibration | |
| should be done as well. | |
| (1) | Test signal: 480i |
| (2) | Test Pattern: SMPTEbar |
- Note
White/Black
InFocus II
/ 64 gray RGBW
SMPTEbar
X1161/X1261/X1161A/X1161N/X110/H5360 
Confidential
4-