Acer X110 service manual Disassembly & Assembly Process, Equipment Needed & Product Overview

Chapter 2

Disassembly & Assembly Process

2-1 Equipment Needed & Product Overview

1.Screw Bit (+): 105

2.Screw Bit (+): 107

3.Screw Bit (-): 107

4.Hex Sleeves 5mm

5.Long Nose Nipper

6.Tweezers

7.Projector

*Before you start: This process is protective level II. Operators should wear electrostatic chains.

*Note: - If you need to replace the Main Board, you have to get into Service Mode and record the lamp usage hour, please refer to section 2-21.

-As the process of X1161/ X1161A/X1161N/X110/H5360 disassembling is the same as X1261, we take X1261 for example here.

X1161/X1261/X1161A/X1161N/X110/H5360 Confidential

2-