No | Symptom | Procedure | |
|
| - Ensure the projection screen without dirt | |
|
| - Ensure the projection lens is clean | |
9 | Poor Uniformity/ | - Ensure the Brightness is within spec | |
Shadow | |||
| - Check rod alignment | ||
|
| ||
|
| - Check Engine Module | |
|
|
| |
|
| - Ensure the projection screen without dirt | |
|
| - Ensure the projection lens is clean | |
10 | Dead Pixel/Dust | - Clean DMD Chip and Engine Module | |
(Out of spec.) | |||
| - Check DMD Chip | ||
|
| ||
|
| - Check Engine Module | |
|
|
| |
|
| - Ensure that the signal cables and source work as well | |
11 | Garbage Image | - Check Main Board | |
|
| - Check DMD Board | |
|
|
| |
|
| - Remote Controller | |
|
| a. Check Battery | |
12 | Remote Controller | b. Check Remote Controller | |
Failed | |||
| c. Check IR Sensor Board | ||
|
| ||
|
| d. Check Main Board | |
|
|
| |
13 | Function Abnormal | - Do "Reset (All data)" of the OSD Menu | |
- Check Main Board | |||
|
| ||
|
|
| |
|
| - Ensure that the signal cables and source are work as well | |
14 | Audio Abnormal | - Ensure that your Projector is not in “Mute” mode | |
| |||
(X1261/H5360 only) | - Check Main Board | ||
| |||
|
| ||
|
| - Check Speaker |
| X1161/X1261/X1161A/X1161N/X110/H5360 | Confidential | 3- |