Onkyo HT-RC430 instruction manual En-42, Hardware

Page 42

Setting the Incoming Digital Signal (Fixed Mode)

■Fixed Mode

`Off:

The format is detected automatically. If no digital input signal is present, the corresponding analog input is used instead.

`PCM:

Only 2-channel PCM format input signals will be heard. If the input signal is not PCM, the PCM indicator will flash and noise may also be produced.

`DTS:

Only DTS (but not DTS-HD) format input signals will be heard. If the input signal is not DTS, the dts indicator will flash and there will be no sound.

When “HDMI”, “COAXIAL” or “OPTICAL” is selected in the “Audio Selector” setting, you can then specify the signal type in “Fixed Mode”.

Normally, the AV receiver detects the signal format automatically. However, if you experience either of the following issues when playing PCM or DTS material, you can manually set the signal format to PCM or DTS.

•If the beginnings of tracks from a PCM source are cut off, try setting the format to PCM.

•If noise is produced when fast forwarding or reversing a DTS CD, try setting the format to DTS.

Note

•The setting will be reset to “Off” when you change the setting in the “Audio Selector” (➔ page 41).

Hardware

1

2

3

4

5

6

Menu

Hardware

OSD

■Volume OSD

`On

`Off

Turn this setting on to display the volume level on the TV screen while it is adjusted.

Remote ID

■Remote ID

`1, 2, or 3

When several Onkyo components are used in the same room, their remote ID codes may overlap. To differentiate the AV receiver from the other components, you can change its remote ID from “1”, to “2” or “3”.

Note

•If you do change the AV receiver’s remote ID, be sure to change the remote controller to the same ID (see below), otherwise, you won’t be able to control it with the remote controller.

Changing the remote controller’s ID

1

While holding down RECEIVER, press and hold

 

down SETUP until the remote indicator lights

 

(about 3 seconds).

2

Use the number buttons to enter ID 1, 2, or 3.

The remote indicator flashes twice.

En-42

Advanced Operations

Tuner

■AM/FM Freq Step

`10kHz/200kHz:

`9kHz/50kHz:

Select the frequency step according to your area. For AM/FM tuning to work properly, you must specify the AM/FM frequency step used in your area.

Note

• When this setting is changed, all radio presets will be deleted.

Auto Standby

■Auto Standby

`Off

`On

When “Auto Standby” is set to “On”, the AV receiver will automatically enter standby mode if there is no operation for 30 minutes with no audio and no video signal input.

“Auto Standby” will appear on the AV receiver’s display and OSD 30 seconds before the Auto Standby comes on.

Note

•Set to “On”, the Auto Standby function may activate itself during playback with some sources.

Page 41 Page 43
Image 42
Page 41 Page 43
Contents HT-RC430 En-2 Precautions En-3Supplied Accessories Make sure you have the following accessoriesEn-4 Table of Contents Features En-6Front & Rear Panels En-7Front Panel En-8 DisplayEn-9 Power cordRemote Control jack Rear PanelRemote Controller En-10Controlling the AV Receiver Connecting the Speaker Cables Connecting the AV ReceiverConnecting Your Speakers En-11Attaching the Speaker Cable Labels Speaker ConfigurationEn-12 Number of speakersEn-13 Speaker Connection PrecautionsUsing a Powered Subwoofer TipAbout AV Connections Connecting AV componentsEn-14 AV Cables and JacksAudio Return Channel ARC function Connecting Components with HdmiEn-15 Jack ComponentsEn-16 Connecting Your ComponentsHow to record a video source Assignment can be changed pages 37Connecting Onkyo uComponents Connecting a Recording ComponentEn-17 Be careful not to injure yourself when using thumbtacks Connecting the AntennasConnecting the Power Cord Plug the power cord into an AC wall outletTurning On/Off the AV Receiver En-19Turning On Turning Off Playback En-20Playing the Connected Component Controlling Contents of USB Devices En-21En-22 Extended Mode ControlStandard Mode Control Understanding Icons on the DisplayEn-23 Playing a USB DevicePress Enter En-24 Using the TunerTuning into Radio Stations Listening to AM/FM RadioDeleting Presets Presetting AM/FM StationsSelecting Presets En-25En-26 Using Basic FunctionsUsing the Listening Modes Selecting Listening ModesExplanatory Notes a b En-27About Listening Modes Input SourceEn-28 Onkyo-Original DSP Listening ModesEn-29 Listening ModesEn-30 Neo6Using the Home Menu En-31Selecting Speakers a and B En-32 Using the Sleep TimerSetting the Display Brightness Displaying Source InformationChanging the Input Display Using the Music OptimizerEn-33 Muting the AV ReceiverRecording Using HeadphonesEn-34 AV RecordingEn-35 On-screen SetupCommon Procedures in Setup Menu Explanatory NotesSetup menu items Menu item Setting targetEn-36 Hdmi Input Input selector Default assignmentEn-37 Component Component Video InputCenter*1, Surround*1 En-38Front Crossover Crossover FrequencyEn-39 Sp Distance Speaker Distance Level Cal Level CalibrationEn-40 Audio AdjustTheater-Dimensional Multiplex/MonoEn-41 Source SetupPreset Name For Input Selector Audio SelectorEn-42 HardwareHdmi Ctrl Rihd Hdmi SetupEn-43 Hdmi ThroughTone Control Using the Audio SettingsEn-44 Speaker LevelsMusic Optimizer En-45Late Night CinemaFILTEREn-46 Using the Onkyo DockIPod/iPhone Playback via Onkyo Dock RI DockWith the RI Control En-47Controlling Your iPod/iPhone Without the RI ControlRemote Control Codes for Onkyo Components Connected via u Preprogrammed Remote Control CodesEntering Remote Control Codes Controlling Other Onkyo ComponentsResetting the Remote Mode Buttons Resetting the Remote ControllerEn-49 Controlling a Blu-ray Disc/DVD Player, HD DVD Player En-50Controlling Other Components Blu-ray Disc player / HD-DVD player operationEn-51 CD player / CD recorder / MD recorder operationCassette tape deck operation Can’t turn on the AV receiver TroubleshootingEn-52 AV receiver turns off unexpectedlyEn-53 En-54 En-55 En-56 Connection Tips and Video Signal Path En-57Players/Recorders Using an RIHD- compatible TV, Player, or RecorderEn-58 For p-compatible TVConfirm the settings How to connect and setupConfirm the connecting and setting En-59About Hdmi En-60USB Features En-61License and Trademark Information En-62Specifications En-634 0 1 1 1
Top Page Image Contents