Onkyo HT-RC430 En-59, How to connect and setup, Confirm the connecting and setting

Page 59

■How to connect and setup

1 Confirm the connecting and setting.

1.Connect the HDMI OUT jack to the HDMI input jack of the TV.

Blu-ray Disc/DVD player, etc.

 

 

 

 

 

 

 

 

HDMI

 

 

 

 

 

 

 

 

connection

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AV receiver

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DIGITAL AUDIO

 

 

 

 

 

 

 

 

HDMI

connection

 

 

 

 

 

 

 

 

connection

(OPTICAL)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TV, projector, etc.

2.Connect the audio output from the TV to the OPTICAL IN 2 jack of the AV receiver using an optical digital cable.

Note

• When the audio return channel (ARC) function is used with

2

3

 

 

 

 

Appendix

Change each item in the “HDMI Setup” menu

4 Operate with the remote controller.

according to the following settings:

 

For buttons that can be operated (➔ page 48).

• HDMI Ctrl (RIHD): On

 

 

 

 

Note

 

• Audio Return Ch (ARC): Auto

 

 

 

• Audio from DVD-Audio or Super Audio CD may not output

 

 

 

See details of each setting (➔ pages 43, 44).

 

from the TV speakers. You will be able to output the audio

 

from the TV speakers by setting the audio output of the

Confirm the settings.

 

DVD player to 2ch PCM. (It may not be possible depending

1. Turn on the power for all connected components.

 

on the player models.)

 

• Even if you set to output audio on the TV speakers, audio

2.

Turn off the power of the TV, and confirm that the

 

 

will be output from the speakers connected to the AV

 

power of the connected components is turned off

 

 

 

receiver when you adjust the volume or switch the input on

 

automatically with the link operation.

 

the AV receiver. To output audio from the TV speakers, re-

3. Turn on the power of the Blu-ray Disc/DVD

 

do the operations on the TV.

 

player/recorder.

 

• In case of an pconnection with uand uaudio

4.

Start playback on the Blu-ray Disc/DVD

 

control compatible components, do not connect the u

 

player/recorder, and verify the following.

 

cable at the same time.

 

 

• On the TV, when you select anything other than the HDMI

 

• The AV receiver automatically turns on, and

 

 

 

jack to which the AV receiver is connected, the input on the

 

selects the input to which the Blu-ray

 

 

 

AV receiver will be switched to “TV/CD”.

 

Disc/DVD player/recorder is connected.

 

 

 

• The AV receiver will automatically power on in conjunction

 

• The TV automatically turns on, and selects the

 

 

 

when it determines it to be necessary. Even if the AV

 

input to which the AV receiver is connected.

 

receiver is connected to an pcompatible TV or

5. Following the operating instructions of the TV,

 

player/recorder, it will not power on if it is not necessary. It

 

select “Use the TV speakers” from the menu

 

may not power on in conjunction when the TV is set to

 

screen of the TV, and confirm that the audio is

 

output audio from the TV.

 

output from the speakers of the TV, and not from

 

• Linked functions with the AV receiver may not work

 

 

 

 

an ARC capable TV, this connection is not necessary

the speakers connected to the AV receiver.

depending on the component model connected. In such cases, operate the AV receiver directly.

(➔ page 44).

3.Connect the HDMI output of the Blu-ray Disc/DVD player/recorder to the HDMI IN 1 jack of the AV receiver.

Note

•It is necessary to assign the HDMI input when connecting the Blu-ray Disc/DVD player/recorder to other jacks (➔ page 37). Do not assign an HMDI IN to the TV/CD selector at this time, otherwise appropriate CEC (Consumer Electronics Control) operation will not be guaranteed.

6.Select “Use the speakers connected from the AV receiver” from the menu screen of the TV, and confirm that the audio is output from the speakers connected to the AV receiver, and not from the TV speakers.

Note

•Perform the above operations when you use the AV receiver for the first time, when the settings of each component are changed, when the main power of each component is turned off, when the power cable is disconnected from the power supply, or when there has been a power outage.

En-59

Page 58 Page 60
Image 59
Page 58 Page 60
Contents HT-RC430 En-2 En-3 PrecautionsEn-4 Supplied AccessoriesMake sure you have the following accessories Table of Contents En-6 FeaturesFront Panel Front & Rear PanelsEn-7 Display En-8Rear Panel Power cordRemote Control jack En-9Controlling the AV Receiver Remote ControllerEn-10 En-11 Connecting the AV ReceiverConnecting Your Speakers Connecting the Speaker CablesNumber of speakers Speaker ConfigurationEn-12 Attaching the Speaker Cable LabelsTip Speaker Connection PrecautionsUsing a Powered Subwoofer En-13AV Cables and Jacks Connecting AV componentsEn-14 About AV ConnectionsJack Components Connecting Components with HdmiEn-15 Audio Return Channel ARC functionAssignment can be changed pages 37 Connecting Your ComponentsHow to record a video source En-16En-17 Connecting Onkyo uComponentsConnecting a Recording Component Plug the power cord into an AC wall outlet Connecting the AntennasConnecting the Power Cord Be careful not to injure yourself when using thumbtacksTurning On Turning Off Turning On/Off the AV ReceiverEn-19 Playing the Connected Component PlaybackEn-20 En-21 Controlling Contents of USB DevicesUnderstanding Icons on the Display Extended Mode ControlStandard Mode Control En-22Press Enter En-23Playing a USB Device Listening to AM/FM Radio Using the TunerTuning into Radio Stations En-24En-25 Presetting AM/FM StationsSelecting Presets Deleting PresetsSelecting Listening Modes Using Basic FunctionsUsing the Listening Modes En-26Input Source En-27About Listening Modes Explanatory Notes a bOnkyo-Original DSP Listening Modes En-28Listening Modes En-29Neo6 En-30Selecting Speakers a and B Using the Home MenuEn-31 Displaying Source Information Using the Sleep TimerSetting the Display Brightness En-32Muting the AV Receiver Using the Music OptimizerEn-33 Changing the Input DisplayAV Recording Using HeadphonesEn-34 RecordingExplanatory Notes On-screen SetupCommon Procedures in Setup Menu En-35En-36 Setup menu itemsMenu item Setting target Component Component Video Input Input selector Default assignmentEn-37 Hdmi InputCrossover Crossover Frequency En-38Front Center*1, Surround*1Sp Distance Speaker Distance Level Cal Level Calibration En-39Multiplex/Mono Audio AdjustTheater-Dimensional En-40Audio Selector Source SetupPreset Name For Input Selector En-41Hardware En-42Hdmi Through Hdmi SetupEn-43 Hdmi Ctrl RihdSpeaker Levels Using the Audio SettingsEn-44 Tone ControlCinemaFILTER En-45Late Night Music OptimizerRI Dock Using the Onkyo DockIPod/iPhone Playback via Onkyo Dock En-46Without the RI Control En-47Controlling Your iPod/iPhone With the RI ControlControlling Other Onkyo Components Preprogrammed Remote Control CodesEntering Remote Control Codes Remote Control Codes for Onkyo Components Connected via uEn-49 Resetting the Remote Mode ButtonsResetting the Remote Controller Blu-ray Disc player / HD-DVD player operation En-50Controlling Other Components Controlling a Blu-ray Disc/DVD Player, HD DVD PlayerCassette tape deck operation En-51CD player / CD recorder / MD recorder operation AV receiver turns off unexpectedly TroubleshootingEn-52 Can’t turn on the AV receiverEn-53 En-54 En-55 En-56 En-57 Connection Tips and Video Signal PathFor p-compatible TV Using an RIHD- compatible TV, Player, or RecorderEn-58 Players/RecordersEn-59 How to connect and setupConfirm the connecting and setting Confirm the settingsEn-60 About HdmiEn-61 USB FeaturesEn-62 License and Trademark InformationEn-63 Specifications4 0 1 1 1
Top Page Image Contents