Onkyo HT-RC440 En-45, Source Setup, Preset Name For Input Selector, Audio Selector, Sync

Source Setup				Preset Name For Input Selector
				■ Name
1	2	3	4 “Setup” 5
				`- - -,Blu-ray,DVD, HD DVD, VCR, DVR, Tivo,
Items can be set individually for each input selector.				CableSTB, SAT STB, PS3, Wii, Xbox, PC, TV, CD,
				TAPE, iPod:
				To reset to the default, select “- - -”.
Preparation
				You can enter a preset name for each individual input
Press the input selector buttons to select an input source.
				selector for easy identification. When entered, the preset
				name will be displayed.

Menu	Source Setup
	Note

Advanced Operations

Audio Selector

■Audio Selector

`ARC:

The audio signal from your TV tuner can be sent to the HDMI OUT of the AV receiver.*1

With this selection, the TV’s audio can be automatically selected as a priority among other assignments.

`HDMI:

This can be selected when HDMI IN has been assigned as an input source. If both HDMI (HDMI

A/V Sync

■A/V Sync

`0 msec to 400 msec in 10 msec steps.

When using progressive scanning on your Blu-ray Disc/DVD player, you may find that the picture and sound are out of sync. With this setting, you can correct this by delaying the audio signals.

To view the TV picture while setting the delay, press

ENTER.

To return to the previous screen, press RETURN.

The range of values you can adjust will depend on whether your TV or display supports HDMI Lip Sync and if the “LipSync” setting is set to “On” or not (➔ page 48).

•You can’t assign the same preset name to multiple input selectors.

•This setting cannot be used for the AM, FM, NET or USB input selector.

IN) and digital audio inputs (COAXIAL IN or OPTICAL IN) have been assigned, HDMI input is automatically selected as a priority.

`COAXIAL:

This can be selected when COAXIAL IN has been assigned as an input source. If both coaxial and HDMI inputs have been assigned, coaxial input is automatically selected as a priority.

`OPTICAL:

This can be selected when OPTICAL IN has been assigned as an input source. If both optical and HDMI inputs have been assigned, optical input is automatically selected as a priority.

`ANALOG:

The AV receiver always outputs analog signals.

Note

•A/V Sync is disabled when the Direct listening mode is used with an analog input source.

•This setting cannot be used with the NET input selector.

You can set priorities of audio output when there are both digital and analog inputs.

Note

•This setting can be made only for the input source that is assigned as HDMI IN, COAXIAL IN, or OPTICAL IN.

*1 You can select “ARC” if you select the TV/CD input selector. But you cannot if you’ve selected “Off” in the “Audio Return Ch” setting (➔ page 48).

En-45