Onkyo HT-RC440 En-63, Update procedure, Troubleshooting, Errors during an update via network

Page 63

Update procedure

1 Press RECEIVER followed by HOME on the remote controller.

The Home menu appears on the TV screen.

2 Select “F/W Update” and press ENTER.

Note that the “F/W Update” option will be grayed out for a short while after the AV receiver is turned on. Please wait until it becomes operable.

3 Select “Update via NET” and press ENTER.

Note that this option will not be available if there is no firmware file newer than the currently installed version.

4 Select “Update” and press ENTER. The update process will begin.

During the update process, the on-screen display may disappear depending on the updated program. When this occurs, you can still view the update progress on the AV receiver’s display. The on-screen display will reappear after the update is complete, and upon turning the AV receiver off and on again.

5 The message “Completed!” appears on the AV receiver’s display, indicating that the update has been completed.

6 Turn off the AV receiver using 8ON/STANDBY on the front panel.

Do not use 8RECEIVER on the remote controller. Once turned off, the AV receiver will automatically turn on again.

Congratulations! You now have the latest firmware installed on your Onkyo AV receiver.

Troubleshooting

Case 1:

If an error occurs, “Error!! *-**” is displayed on the AV receiver’s display. (Alpha-numeric characters on the front display are denoted by asterisks.) Refer to the following table and take appropriate action.

■Errors during an update via network

Error Code

Description

*-10,*-20

The Ethernet cable was not detected.

 

Reconnect the cable properly.

 

 

*-11,*-13,*-21,

Internet connection error.

*-28

Check the following items:

 

• Make sure the IP address, subnet mask,

 

gateway address, and DNS server are

 

configured properly.

 

• Make sure the router is turned on.

 

• Make sure the AV receiver and the router are

 

connected with an Ethernet cable.

 

• Make sure your router is configured properly.

 

See the instruction manual of the router.

 

• If your network allows only one client

 

connection and there is any other device

 

already connected, the AV receiver will not be

 

able to access the network. Consult your

 

Internet Service Provider (ISP).

 

• If your modem does not function as a router,

 

you will need a router. Depending on your

 

network, you may need to configure the proxy

 

server if necessary. See the document

 

provided by your ISP. If you are still unable to

 

access the Internet, the DNS or proxy server

 

may be temporarily down. Contact your ISP.

 

 

Others

Retry the update procedure from the beginning.

 

If the error persists, please contact Onkyo

 

Support (➔ page 65) and provide the error

 

code.

 

 

Case 2:

If an error occurs during the update process, disconnect then reconnect the AC power cord and try again.

En-63

Appendix

Case 3:

If you do not have an Internet connection to the network, please contact Onkyo Support (➔ page 65).

Page 62 Page 64
Image 63
Page 62 Page 64
Contents HT-RC440 En-2 En-3 PrecautionsSupplied Accessories Make sure you have the following accessoriesEn-4 Table of Contents En-6 FeaturesFront & Rear Panels En-7Front Panel Display Z2 Zone 2 indicator 3D indicatorThis lights when a 3D input signal is detected En-8Rear Panel Power cordRemote Control jack En-9Remote Controller En-10Controlling the AV Receiver Connecting the AV Receiver Connecting Your SpeakersEn-11 Tip Speaker Connection PrecautionsUsing a Powered Subwoofer En-12En-13 About AV ConnectionsAV Cables and Jacks Jack Components Connecting Components with HdmiEn-14 Audio Return Channel ARC functionConnecting Your Components En-15Jack/Port Components En-16 Connecting Onkyo RI ComponentsSystem On/Auto Power On Remote ControlEn-17 Connecting the AntennasConnecting the Power Cord Plug the power cord into an AC wall outletTurning On If the Update New F/W window appearsTurning On/Off the AV Receiver En-18Playing the Connected Component Operating with the remote controllerPlayback En-19En-20 Controlling Contents of USB or Network DevicesUnderstanding Icons on the Display Extended Mode ControlStandard Mode Control En-21En-22 Playing a USB DeviceListening to vTuner Internet Radio En-23 Registering Other Internet RadioTake a note of the IP address Windows Media Player 11 Setup En-24Playing Music Files on a Server Remote Playback Windows Media Player 12 SetupUsing Remote Playback En-25Listening to AM/FM Radio Using the TunerTuning into Radio Stations En-26En-27 Presetting AM/FM StationsSelecting Presets Deleting PresetsSelecting Listening Modes Using Basic FunctionsUsing the Listening Modes En-28Input Source En-29About Listening Modes Explanatory NotesOnkyo-Original DSP Listening Modes En-30DTS En-31Listening Modes DSD*1Listening Mode Description Input Speaker Source Layout Neo6 En-32TV, DVD, VHS En-33 Using the Home MenuDisplaying Source Information Using the Sleep TimerSetting the Display Brightness En-34Muting the AV Receiver Using the Music OptimizerEn-35 Changing the Input DisplayEn-36 Using HeadphonesExplanatory Notes On-screen SetupUsing the Quick Setup En-37En-38 Using the Audio Settings of Quick SetupCinema Filter Using the Setup Menu HomeEn-39 CinemaFILTEREn-40 About the Hybrid Standby indicatorSetup menu items Menu item Setting targetComponent Component Video Input Input selector Default assignmentEn-41 Hdmi InputSp Config Speaker Configuration En-42Digital Audio Digital Audio Input En-43 Sp Distance Speaker DistanceLevel Cal Level Calibration Multiplex/Mono Audio AdjustTheater-Dimensional En-44Audio Selector Source SetupPreset Name For Input Selector En-45Hardware En-46Hdmi Through Hdmi SetupEn-47 Hdmi Ctrl RihdEn-48 Network SetupEn-49 Controlling Zone 2 Components Connecting the Zone Speakers to an Additional AmplifierZone En-50RI Dock Using the Onkyo DockIPod/iPhone Playback via Onkyo Dock En-51Without the RI Control En-52Controlling Your iPod/iPhone With the RI ControlEn-53 Preprogrammed Remote Control CodesEntering Remote Control Codes Controlling Other ComponentsEn-54 Remote Control Codes for Onkyo Components Connected via RIResetting the Remote Mode Buttons Resetting the Remote ControllerTV operation En-55` 32910/33101/33501/31612 Blu-ray Disc/DVD player with pEn-56 Audio TroubleshootingPower En-57En-58 Tuner Remote ControllerEn-59 VideoUSB Device Playback En-60Zone Music Server and Internet RadioOthers En-61Before you start Firmware UpdateEn-62 Updating the Firmware via NetworkEn-63 Update procedureTroubleshooting Errors during an update via networkUpdating the Firmware via USB En-64En-65 Errors during an update via USBAudio Connection Formats Connection Tips and Video Signal PathEn-66 Video Connection FormatsOperations that can be performed with Connection Using an RIHD- compatible TV, Player, or RecorderEn-67 About p-compatible componentsEn-68 How to connect and setupConfirm the connection and settings Confirm the settingsAbout Copyright Protection About HdmiEn-69 Supported Audio FormatsNetwork Requirements Network/USB FeaturesConnecting to the Network En-70Server playback En-71Server Requirements USB Device RequirementsEn-72 Supported Audio File FormatsAbout Dlna En-73 License and Trademark InformationEn-74 SpecificationsEn-75 Memo4 0 1 3 1 6 E N En-1 Using Internet RadioCommon Procedures in Internet Radio Menu Using Multiple AccountsPandora internet radio Getting Started U.S. onlyMenu Items Using the keyboard screen Using Rhapsody U.S. onlyUse q/wto select the desired channel and then press Using the SiriusXM Internet Radio North American onlyUse q/wto select Sign In, and then press Enter Channel list screen for the selected category appearsUsing scrobbling control Using Last.fm Internet RadioUsing Slacker Personal Radio Using MP3tunes Playing Contents on the AV ReceiverCreating an Account on your Computer Utilisation de plusieurs comptes Utilisation d’une webradioFr-1 Procédures courantes dans le menu de webradioEléments du menu Fr-2Pour commencer États-Unis UniquementFr-3 Utilisation de Rhapsody Etats-UnisUtilisation de l’écran clavier Permet d’ajouter un canal à la liste My Favorites Fr-4Permet d’ajouter une station à la liste My Favorites Fr-5Utilisation de la webradio Last.fm Pour vous déconnecter de votre compteLa télécommande Fr-6Utilisation de Slacker Personal Radio Uso de múltiples cuentas Uso de Internet RadioEs-1 Procedimientos comunes en el menú Internet RadioEs-2 Primeros pasos solo EE.UUElementos del menú Es-3 Uso de Rhapsody sólo EE.UUUtilización de la pantalla de teclado Añade una emisora a la lista Mis favoritos Es-4Uso de SiriusXM Internet Radio solo Norteamérica Utilice q/wpara seleccionar Sign In, y luego pulse EnterUtilice q/wpara seleccionar un menú y luego pulse Es-5Uso de Last.fm Internet Radio Last.fm es un servicio musical que sabe lo que le gustaMando a distancia Es-6Uso de Slacker Personal Radio Puede controlar las pistas con los botones del4 0 1 1 8 9 B Using Internet Radio Recommendations Drücken Sie NET Internetradio verwendenDe-1 Allgemeine Verfahren bei den Internetradio-MenüsWiedergabe zu starten MenüsymboleVerwendung von Last.fm Internet Radio Verwendung der TastaturanzeigeRemote Control Codes Notas Codes de télécommandeCódigos de control remoto RemarquesCodici del telecomando FernbedienungscodesHinweise Anmärkningar AfstandsbedieningscodesFjärrstyrningskoder Opmerkingen遥控代码 Iptv Dedicated Onkyo ReceiverCable Set Top Box Cable/PVR CombinationAccessory CD-RCassette Deck Satellite Set Top Box Video AccessoryNPG HTSITT NeotionTelevision SAT/PVR CombinationBPL AOCART ATDGFM ESAESC GECMTC LXIMEI MGASLX RFTSBR SEIVCR PVRTV/VCR Combination DVD DVD-R RECTVE Blu-ray DiscTV/DVD Combination HD-DVDMemo 4 0 1 0 9

HT-RC440 specifications

The Onkyo HT-RC440 is a versatile AV receiver that epitomizes the modern home theater experience, combining cutting-edge technologies with user-friendly features. This receiver is designed for those who appreciate high-quality audio and video, ensuring a cinematic experience within the comfort of home.

One of the standout features of the HT-RC440 is its 7.2-channel configuration, which supports immersive surround sound formats, ensuring users can enjoy their favorite movies, music, and games in exceptional audio quality. With a total power output of 100 watts per channel, the receiver delivers strong and dynamic sound that fills the room.

The HT-RC440 is compatible with various audio formats, including Dolby TrueHD and DTS-HD Master Audio, providing a studio-quality sound experience. In addition, it supports a range of video formats, making it a suitable choice for connecting to various high-definition sources.

Connectivity is a key aspect of the HT-RC440. It features six HDMI inputs and two outputs, allowing users to connect multiple devices, such as Blu-ray players, game consoles, and streaming devices, while supporting 4K video pass-through. This makes it future-proof for evolving home theater setups. The receiver also includes optical and coaxial digital inputs, as well as analog inputs, catering to various device types.

In terms of wireless capabilities, the HT-RC440 supports Bluetooth technology, enabling users to stream music from smartphones, tablets, or computers without the need for cables. This feature enhances the convenience of enjoying music from different sources.

The receiver utilizes Onkyo's Audyssey MultEQ technology, which automatically calibrates the audio output according to the room's acoustic characteristics. This ensures a balanced and tailored listening experience that maximizes audio performance based on the room environment.

Control of the HT-RC440 is facilitated by a user-friendly interface and remote control. Additionally, users have the option to download the Onkyo app to control the receiver through their smartphones, enhancing the accessibility and ease of use.

With its combination of advanced technology, high-quality audio performance, and robust connectivity options, the Onkyo HT-RC440 is an excellent choice for creating a comprehensive home theater system. Whether for watching movies or enjoying music, this AV receiver delivers exceptional sound and video quality, solidifying its place in the competitive market of home audio solutions.
Top Page Image Contents