Adjusting the sound

TV/CATV TV/AV MUTE POWER

The tuner system permits you to adjust many viewing parameters easily. These are:

Audio Mute: Pressing the MUTE button will disable the audio

.output, and will display "MUTE" on the upper right corner of the monitor screen. To cancel the muting function, press MUTE again.

9 0

VOL CH

7 8

FM/AM SETUP

Monitor

+ FUNC

- MODE

Please note that if you are using FM Modulation to provide audio signal from the tuner to you car radio, applying the mute function will also mute the audio portion of the signal delivered by the transmitter but not the tuner's output carrier signal. This may result in noise on your car radio.

Providing A/V audio to your car radio

This system offers you two ways of playing the A/V audio through your car radio system. If your radio has AUX line-level inputs, you can attach the A/V Audio output connectors to these inputs with RCA-RCA interconnect cables.

If your car radio lacks these AUX line level inputs, your other option is to use the tuner's audio transmission ability (described in the next paragraph)to broadcast the audio signal within your car directly to the radio via FM modulation.

Transmitting audio to your car radio

This tuner system is able to transmit the audio signal to your car radio in the FM radio spectrum. By tuning your radio to a corresponding channel, you can listen to the audio from your program source. This function is particularly important when installing in car whose radio lacks AUX line level inputs.

To use this system tune your car radio from FM 88.1 to FM 99.9 for 20 channels the on you're A/V audio source.

You should be able to hear your AV audio broadcast through your car radio system. If you do not, go back into the Fm CHANNEL mode of the menu system and select FM 88.1 MHz to FM 91.9 MHz by channel step 0.2 MHz,,and exit the menu system.

To stop broadcasting your Video sound thru your car radio, tune the FM Band to any other channel or enter the menu system and select OFF in the FM CHANNEL submenu.