PYLE Audio PLD71MU Preparing the Remote Control, Inserting the Battery, Using the Remote Control

Remote Control

Ref #	Button	Function
24	0-9	These buttons are used for numeric entry in many different menus.
		In addition, in Radio Mode (when RDS is engaged), 0 serves as
		the TA button and 9 serves as the AF button.
25	+10	This button is used with the other number buttons for use with
		two-digit number entries.
26	1-6	Six numbered preset buttons store and recall stations for each band.

Preparing the Remote Control

Inserting the Battery

1.First push to inside as the direction indicated by the arrow (See 1 )And then

Remove the battery holder as the direction indicated by the arrow (See 2 ).

2.Replace the battery Set a new battery property with (+)side up as illustrated (See 3 ).

3.Insert the battery holder. Push in the holder to the original position(See 4 ).

Using the Remote Control

Face the remote control towards the player front face IR mark (remote control signal receiver).

Operation angle: About 30 degree in each the direction of the front of the IR mark.

Note :

The lithium cell in the battery compartment of remote control has been secured for transport with a foil . Before initial use please remove this foil so that the remote control is ready for operation .

-12-