PYLE Audio PLD71MU Setting Audio Modes, Reset Factory Settings, Alternate AUDIO/VIDEO Source

Basic Operation

Balance: R 0-10 to L 0-10 .

Adjust sound balance between left and right speakers by using VOL + / - . Fader: F 0-10 to R 0 -10 .

Adjust sound balance between front and rear speakers by using VOL + / VOL - .

The RESET button is to be activated for the following reasons:

A. Initial installation of the unit when all wiring is completed.

B. All the function buttons do not operate. C. Error symbol on the display.

Setting Audio Modes

ALTERNATE AUDIO/VIDEO SOURCE

DSP

Touch the screen the DSP range (or press the EQ button on the remote control ) to select one of the preset sound modes .

On the front panel of the unit , there is an AUX IN jack, to connect analogue replay devices. Use this jack to replay sound of other replay equipment such as

(Rock/Pop/Jazz/Classic/Flat) . The information will display in the monitor as follow :

POP	ROCK			JAZZ
FLAT				CLASSIC
FLAT	16: 18
	POP		DISC-IN
S-WOOFER	TA	AF	CLK	LUD
OSD	DSP	GOTO

touch to select

It`s depend on your habit to select the Audio mode .

Reset Factory Settings

RESET button is placed on the housing and must be activated with either a ballpoint pen or thin metal object.

RESET

RES

DVD players, computers, etc.

Via the loudspeakers.

1). Please following the diagram below, connect the external device with stereo jack plug the AUX IN socket .

2). Press the MOD button to select the AUX IN connection.

3). Use the buttons on the external device itself to operate it .

AUX IN

AUX IN

Headphones port

-18-