PYLE Audio PLD71MU manual Radio Operation, Listening to the Radio

Radio Operation

Listening to the Radio

Switching To Radio Mode

MODE Touch the screen of “MODE” range (or press the MOD button on the front panel ) repeatedly to

select the RADIO mode. the following information will appears as below:

FLAT			12:06
	ST			NO-DISC	DX
FM1			87.60 MHZ
MODE		MUTE ON
1	2	3	4	5	6
VOLUME-		SEL	VOLUME+

FLAT			12:06		AF
	ST			NO-DISC	DX
FM1			87.60 MHZ
BND	PTY	S-WOOFER		APS
TA	AF	CLK	LUD	LOC/DX
	STEREO/MONO			DSP

Start Searching For a Station

Manual Search

During Radio mode, briefly touch the

screen of “ ” section or press the

“ ” on front panel to increase frequency by one step of channel spacing .

Briefly touch the “ ” section or press the “ ” button on the front panel to decrease frequency by one step of channel spacing .

Automatic Search

During Radio mode, touch and hold

(for more than 2’s ) the screen of “ / ” section or press longer the “ / ” on the front panel to start search for a radio station automatically .

When an FM stereo broadcast is hard to receive

Touch the “STEREO/MONO” section on touch screen (or press ST/MO button on the remote control ) to select the MONO or STEREO mode .

(When Stereo mode is activated, the ST symbol will appear . )

Touch “ ” to next .

Touch “ ” to previous .

Selecting The Frequency Band

BND Touch the screen of “ BND ” section (or press the BND on the front panel ) repeatedly to

select the band , the message will show in turn :

FM1 FM2 FM3

AM2(MW2) AM1(MW1)

To tune in strong-singnal FM Station only (LO/DX function)

Touch the “ LOC/DX ” range on the touch screen (or press LO/DX button on the remote control ) to select the LOCAL

or DX mode .

( You can choose between the LOCAL and DX(DISTANCE) mode for local or long-distance traffic news . )

-19-