Other Main Operation
USB Operation
Following the diagram below, connect your USB device to the front panel USB port . If it is properly connected, the device will be mounted and start playing automatically.
Changing From DISC to USB Playback Modes
If the disc present in the player is an MP3 disc, touch 
section on screen or press the STOP on remote once then touch or press the GOTO to USB playback.
If the disc present in the player is an DVD or VCD or CD disc, touch 
on the screen or press STOP twice on the remote then touch GOTO section on the screen or press the GOTO button on the remote to USB playback.
Important Note:
To prevent damage to the USB device, do not remove or disconnect it during playback. it is also a good practice to remove the USB drive during disc playback.
In USB Playback mode
Use the UP, DOWN, RIGHT or LEFT buttons to navigate to and select files to play, and press ENTER to begin playback (or viewing, in the case of JPEG files). To skip to the next or last
track, touch or press the 
or 
.
Press the 
or 
buttons for Fast Forward or Fast Reverse playback. REPEAT play modes are also available by repeatedly pushing REPEAT until the desired mode is found.
Changing From USB to DISC Playback modes
If you are in USB Playback mode and wish to begin playback of a disc already in the player, touch the 
range on the touch screen or press the STOP on the remote once. Then touch GOTO range on the screen or press the GOTO on the remote and the player will switch to DVD/VCD/CD/MP3 Playback mode.