Onkyo HT-r591 instruction manual En-60

Page 60

If the input signal format is set to “PCM” or “DTS”. 48 Set it to “Off”.

■Only the front speakers produce sound

When the Stereo or Mono listening mode is selected,

32

only the front speakers and subwoofer produce

 

sound.

 

 

 

Check the Speaker Configuration.

42

 

 

■Only the center speaker produces sound

If you use the Dolby Pro Logic IIx Movie, Dolby Pro — Logic IIx Music, or Dolby Pro Logic IIx Game listening mode with a mono source, such as an AM radio station or mono TV program, the sound is concentrated in the center speaker.

Make sure the speakers are configured correctly.

42

■The surround speakers produce no sound

When the T-D (Theater-Dimensional), Stereo or

—

Mono listening mode is selected, the surround

 

speakers produce no sound.

 

 

 

Depending on the source and current listening mode,

30

not much sound may be produced by the surround

 

speakers. Try selecting another listening mode.

 

Make sure the speakers are configured correctly.

42

■The center speaker produces no sound

When the Stereo or Mono listening mode is selected, — the center speaker produces no sound.

Make sure the speakers are configured correctly.

42

■The front high or surround back speakers produce no sound

Depending on the current listening mode, no sound

30

may be produced by the front high or surround back

 

speakers. Select another listening mode.

 

 

 

Not much sound may be produced by the front high

—

or surround back speakers with some sources.

 

Make sure the speakers are configured correctly.

42

■The subwoofer produces no sound

When you play source material that contains no

—

information in the LFE channel, the subwoofer

 

produces no sound.

 

 

 

Make sure the speakers are configured correctly.

42

 

 

■There’s no sound with a certain signal format

Check the digital audio output setting on the

—

connected device. On some game consoles, such as

 

those that support DVD, the default setting is off.

 

 

 

With some DVD-Video discs, you need to select an

—

audio output format from a menu.

 

Depending on the input signal, some listening modes

31-32

cannot be selected.

 

■ Can’t get 6.1/7.1 playback

If no surround back speakers or front high speakers

—

are connected, 6.1/7.1 playback is not possible.

 

 

 

Depending on the number of connected speakers, it is

31-32

not always possible to select all of the listening

 

modes.

 

 

 

■The speaker volume cannot be set as required

After the volume level of each individual speaker has

44

been adjusted, the maximum volume may be reduced.

 

 

 

If the volume level of each individual speaker has

27, 44

been adjusted to high positive values, then the

 

maximum master volume possible may be reduced.

 

Note that the individual speaker volume levels are set

 

automatically after the Audyssey 2EQ® Room

 

Correction and Speaker Setup has been completed.

 

 

 

■ Noise can be heard

Using cable ties to bundle audio cables with power

—

cords, speaker cables, and the like may degrade the

 

audio performance, so refrain from doing it.

 

 

 

An audio cable may be picking up interference. Try

—

repositioning your cables.

 

 

 

Appendix

■The Late Night function doesn’t work

Make sure the source material is Dolby Digital,

51

Dolby Digital Plus, or Dolby TrueHD.

 

■ About DTS signals

When DTS program material ends and the DTS

—

bitstream stops, the AV receiver remains in DTS

 

listening mode and the dts indicator remains on. This

 

is to prevent noise when you use the pause, fast

 

forward, or fast reverse function on your player. If

 

you switch your player from DTS to PCM, you may

 

not hear any sound because the AV receiver does not

 

switch formats immediately. In such case, you should

 

stop your player for about three seconds and then

 

resume playback.

 

With some CD and LD players, you won’t be able to — playback DTS material properly even though your player is connected to a digital input on the AV receiver. This is usually because the DTS bitstream

has been processed (e.g., output level, sampling rate, or frequency response changed) and the AV receiver doesn’t recognize it as a genuine DTS signal. In such cases, you may hear noise.

Playing DTS program material, using the pause, fast — forward, or fast reverse function on your player may produce a short audible noise. This is not a malfunction.

■The beginning of audio received by an HDMI IN can’t be heard

Since it takes longer to identify the format of an

—

HDMI signal than it does for other digital audio

 

signals, audio output may not start immediately.

 

En-60

Page 59 Page 61
Image 60
Page 59 Page 61
Contents HT-R591 En-2 Precautions En-3Supplied Accessories Make sure you have the following accessoriesEn-4 Table of Contents Features En-6Front & Rear Panels En-7Front Panel En-8 DisplayRemote Control jack En-9Rear Panel Remote Controller En-10Controlling the AV Receiver Connecting the AV Receiver Connecting Your SpeakersConnecting the Speaker Cables En-11Speaker Configuration Speaker Connection PrecautionsEn-12 Using a Powered Subwoofer En-13Connecting AV components En-14About AV Connections AV Cables and JacksConnecting Components with Hdmi En-15Audio Return Channel ARC function Jack ComponentsConnecting Your Components How to record a video sourceEn-16 Assignment can be changed pages 41Connecting Onkyo uComponents Connecting a Recording ComponentEn-17 Connecting the Antennas Connecting the Power CordEn-18 Turning On/Off the AV Receiver En-19Turning On Turning Off Playback En-20Playing the Connected Component Controlling Contents of USB Devices En-21Extended Mode Control Standard Mode ControlEn-22 Understanding Icons on the DisplayEn-23 Playing a USB DevicePress Enter Using the Tuner Tuning into Radio StationsEn-24 Listening to AM/FM RadioPresetting AM/FM Stations Using RDS excluding North American and Brazilian modelsEn-25 En-26 Displaying Radio Text RTListening to Traffic News TP Finding Stations by Type PTYUsing Basic Functions Using the Automatic Speaker SetupMeasurement procedure En-27En-28 Error Messages Changing the Speaker Setup ManuallyEn-29 Using the Listening Modes En-30Selecting Listening Modes En-31 About Listening ModesExplanatory Notes Input SourceEn-32 Onkyo-Original DSP Listening ModesListening Modes En-33 En-34 HeightDolby EX Neo6Using the Home Menu Using the Sleep TimerEn-35 Setting the Display Brightness En-36Displaying Source Information Changing the Input DisplayUsing the Music Optimizer Using HeadphonesEn-37 Muting the AV ReceiverEn-38 RecordingAV Recording On-screen Setup Common Procedures in Setup MenuEn-39 Explanatory NotesSetup menu items Menu item Setting targetEn-40 Input selector Default assignment En-41Hdmi Input Component Component Video InputEn-42 Center*1, Surround*1Front High*2*3*4 Surround Back*2*3*5En-43 Sp Distance Speaker DistanceLevel Cal Level Calibration Audio Adjust En-44Dolby Multiplex/MonoTheater-Dimensional En-45Source Setup En-46Audyssey Preset Name For Input Selector En-47Sync Setting the Incoming Digital Signal Fixed Mode En-48Hardware Audio SelectorHdmi Setup En-49Tuner Auto StandbyUsing the Audio Settings En-50Tone Control En-51 Speaker LevelsLate Night En-52 Music OptimizerCinemaFILTER Music OptimizerUsing the Onkyo Dock IPod/iPhone Playback via Onkyo DockEn-53 RI DockEn-54 Controlling Your iPod/iPhoneWith the RI Control Without the RI ControlPreprogrammed Remote Control Codes Entering Remote Control CodesRemote Control Codes for Onkyo Components Connected via u Controlling Other Onkyo ComponentsResetting the Remote Mode Buttons Resetting the Remote ControllerEn-56 En-57 Controlling Other ComponentsControlling a Blu-ray Disc/DVD Player, HD DVD Player Blu-ray Disc player / HD-DVD player operationEn-58 CD player / CD recorder / MD recorder operationCassette tape deck operation E/r, Enter Number +10Troubleshooting En-59Can’t turn on the AV receiver AV receiver turns off unexpectedlyEn-60 En-61 En-62 Video ATT Off default En-63Video Attenuation CBL/SAT, GAME, AUX, or USB inputConnection Tips and Video Signal Path En-64Using an RIHD- compatible TV, Player, or Recorder En-65Players/Recorders For p-compatible TVHow to connect and setup Confirm the connecting and settingConfirm the settings En-66About Hdmi En-67USB Features En-68License and Trademark Information En-69Color is a trademark of Sony Corporation Hdmi Licensing LLC in the United States and other countriesSpecifications En-70Memo En-714 0 1 0 5 Supplied Accessories En-1Part Names Before Using the Home Theater Speaker Package Using the Rubber Stoppers for a More Stable PlatformSetting the Subwoofer Level Using the Floor Pads for SubwooferConnecting the Speakers Enjoying Home TheaterFront left and right speakers SKF-591 Subwoofer SKW-591Specifications Powered Subwoofer SKW-591Center Speaker Surround/Surround Back Speakers SKR-590/SKB-590Accessoires fournis Fr-1Noms des pièces Fr-2 Avant d’utiliser l’Ensemble d’enceintes du Home cinémaRéglage du niveau sonore du subwoofer Fixation au murFr-3 Vivez une expérience cinématographique à domicileBranchement des enceintes Précautions concernant le branchement des enceintesCaractéristiques techniques Subwoofer amplifié SKW-591Enceintes surround/surround arrière SKR-590/SKB-590 Enceinte centrale

HT-r591 specifications

The Onkyo HT-R591 is a versatile and high-performance home theater receiver designed to elevate the audio experience for movie lovers and music enthusiasts alike. With its comprehensive features and advanced technologies, this model was engineered to deliver immersive sound quality while being user-friendly and adaptable to a variety of setups.

At the heart of the Onkyo HT-R591 is its powerful amplification system. With a robust 7.1-channel setup, it provides an impressive output of up to 100 watts per channel, ensuring that sound is delivered dynamically and with clarity. This receiver supports a wide range of audio formats, including Dolby TrueHD and DTS-HD Master Audio, allowing for an authentic cinematic experience. The onboard decoding ensures that high-definition audio streams are reproduced with pristine accuracy.

Another notable feature of the HT-R591 is its video capabilities. It includes multiple HDMI inputs, which support 4K pass-through, making it compatible with the latest display technology. This ensures that users can connect multiple devices—such as Blu-ray players, gaming consoles, and streaming devices—without compromising on quality. The receiver also boasts upscaling capabilities that enhance lower resolution signals to near-4K quality, providing a visually stunning experience for all types of content.

In addition to its premium audio and video performance, the Onkyo HT-R591 incorporates advanced sound calibration technology. The AccuEQ room acoustic calibration system optimizes the sound output based on the room's characteristics, ensuring an ideal listening experience tailored to your environment. This technology detects speaker placement and adjusts settings automatically, simplifying the setup process and enhancing audio accuracy.

User convenience is another cornerstone of the Onkyo HT-R591. It comes with an intuitive remote control and an easy-to-navigate on-screen display, making it accessible for users of all technical backgrounds. Furthermore, with the inclusion of network connectivity options, users can stream music directly from their devices or access popular streaming services, expanding their audio library effortlessly.

Overall, the Onkyo HT-R591 stands out as a feature-rich home theater receiver that combines stellar audio performance, advanced video processing, and user-friendly functionality. Whether you are watching the latest blockbuster or enjoying your favorite music tracks, this receiver provides a comprehensive solution for all your home entertainment needs.
Top Page Image Contents