Onkyo HT-r591 En-66, How to connect and setup, Confirm the connecting and setting

■How to connect and setup

1 Confirm the connecting and setting.

1.Connect the HDMI OUT jack to the HDMI input jack of the TV.

Blu-ray Disc/DVD player, etc.

		HDMI
		connection
	AV receiver
DIGITAL AUDIO			HDMI
connection			connection
(OPTICAL)

TV, projector, etc.

2.Connect the audio output from the TV to the OPTICAL IN 2 jack of the AV receiver using an optical digital cable.

Note

• When the audio return channel (ARC) function is used with

2

3

				Appendix
Change each item in the “HDMI Setup” menu		4 Operate with the remote controller.
according to the following settings:			For buttons that can be operated (➔ page 55).
• HDMI Ctrl (RIHD): On
			Note
• Audio Return Ch (ARC): Auto
			• Audio from DVD-Audio or Super Audio CD may not output
See details of each setting (➔ pages 49, 50).			from the TV speakers. You will be able to output the audio
			from the TV speakers by setting the audio output of the
Confirm the settings.			DVD player to 2ch PCM. (It may not be possible depending
1. Turn on the power for all connected components.			on the player models.)
			• Even if you set to output audio on the TV speakers, audio
2.	Turn off the power of the TV, and confirm that the
			will be output from the speakers connected to the AV
	power of the connected components is turned off
			receiver when you adjust the volume or switch the input on
	automatically with the link operation.		the AV receiver. To output audio from the TV speakers, re-
3. Turn on the power of the Blu-ray Disc/DVD			do the operations on the TV.
	player/recorder.		• In case of an pconnection with uand uaudio
4.	Start playback on the Blu-ray Disc/DVD		control compatible components, do not connect the u
	player/recorder, and verify the following.		cable at the same time.
			• On the TV, when you select anything other than the HDMI
	• The AV receiver automatically turns on, and
			jack to which the AV receiver is connected, the input on the
	selects the input to which the Blu-ray
			AV receiver will be switched to “TV/CD”.
	Disc/DVD player/recorder is connected.
			• The AV receiver will automatically power on in conjunction
	• The TV automatically turns on, and selects the
			when it determines it to be necessary. Even if the AV
	input to which the AV receiver is connected.		receiver is connected to an pcompatible TV or
5. Following the operating instructions of the TV,			player/recorder, it will not power on if it is not necessary. It
	select “Use the TV speakers” from the menu		may not power on in conjunction when the TV is set to
	screen of the TV, and confirm that the audio is		output audio from the TV.
	output from the speakers of the TV, and not from		• Linked functions with the AV receiver may not work

an ARC capable TV, this connection is not necessary

the speakers connected to the AV receiver.

depending on the component model connected. In such cases, operate the AV receiver directly.

(➔ page 50).

3.Connect the HDMI output of the Blu-ray Disc/DVD player/recorder to the HDMI IN 1 jack of the AV receiver.

Note

•It is necessary to assign the HDMI input when connecting the Blu-ray Disc/DVD player/recorder to other jacks (➔ page 41). Do not assign an HMDI IN to the TV/CD selector at this time, otherwise appropriate CEC (Consumer Electronics Control) operation will not be guaranteed.

6.Select “Use the speakers connected from the AV receiver” from the menu screen of the TV, and confirm that the audio is output from the speakers connected to the AV receiver, and not from the TV speakers.

Note

•Perform the above operations when you use the AV receiver for the first time, when the settings of each component are changed, when the main power of each component is turned off, when the power cable is disconnected from the power supply, or when there has been a power outage.

En-66