Onkyo HT-r591 On-screen Setup, En-39, Common Procedures in Setup Menu, Explanatory Notes

On-screen Setup

The setup menus provides a convenient way to change the AV receiver’s various settings. Settings are organized into 10 categories.

The on-screen menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected to other video outputs, use the AV receiver’s display when changing settings.

This section describes the procedure for using the remote controller unless otherwise specified.

Note

•The on-screen menus are displayed when:

–There is no video input, or

–The video input is 480p, 576p, 720p, 1080i, or 1080p.

Advanced Operations

Common Procedures in Setup Menu Explanatory Notes

	a	Menu	Sp Config
Remote indicator	b	■ Subwoofer
	c	`Yes
		`No

	RECEIVER
		a Menu selection
ENTER		b Setting target
		c Setting options (default setting underlined)
q/w/e/r
SETUP	RETURN	Menu
		1.	HDMI Input	BD/DVD
		2.	Component	VCR/DVR
1 Press RECEIVER followed by SETUP.		3.	Digital Audio	CBL/SAT
		4.	Sp Config	GAME
2 Use q/wto select a menu item, and then press		5.	Sp Distance	AUX
		6.	Level Cal	TUNER
ENTER.		7.	Audio Adjust	TV/CD
3 Use q/wto select a setting target, and use e/rto		8.	Source Setup
		9.	Hardware	Setting target
change the setting.		10.	HDMI Setup
Press SETUP to close the menu.
Press RETURN to return to the previous menu.			Menu

Note

•This procedure can also be performed on the AV receiver by using SETUP, the cursor buttons, and ENTER.

•During Audyssey 2EQ® Room Correction and Speaker Setup, messages, etc., that are displayed on the TV screen will appear on the AV receiver’s display.

En-39