Onkyo appendix Enjoying music or videos with the HT-R8230, Press STANDBY/ON, Selecting a source

Page 17

Enjoying music or videos with the HT-R8230

Before connecting

•Make sure that all the connections from pages 10 to 16 are complete.

•Turning on the AV Receiver may cause a momentary power surge, which might interfere with other electrical equipment such as computers. If this happens, use a wall outlet on a different circuit.

STANDBY/ON

MASTER VOLUME dial

STANDBY/ON

 

 

STANDBY indicator

SP A

SP B

Before operating the remote controller, press RCVR/TAPE.

 

 

Input selector

SPEAKERS A/B

Input Selector buttons

buttons

 

 

VOLUME

Connecting the power

1.Connect the power cord to a wall outlet.

The HT-R8230 enters standby mode. The STANDBY indicator lights up.

2.Ensure that the A and/or B indicator(s) for the speaker system(s) to be used are lit on the display.

If no indicator is lit, press SPEAKERS A/B on the unit or SP A/ SP B on the remote controller to select the speaker system(s) to be used.

2.Press STANDBY/ON.

The AV Receiver turns on.

The display on the AV Receiver’s front panel light. At the same time, the STANDBY indicator goes off.

Note

To turn off the AV Receiver, press STANDBY/ON. The AV Receiver enters standby mode. Be sure to set the volume to minimum before turning off the AV receiver.

Selecting a source

Before operating the remote controller, press RCVR/TAPE.

1.Press input selector button to select one of the following input sources:

•DVD

•VIDEO 1

•VIDEO 2

•VIDEO 3

•TAPE

•TUNER

•CD

e.g. When VIDEO 3 is selected.

A & B speakers indicators

Volume level

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3.Start playing the selected source.

See page 22 to listen to the radio.

4.Press VOLUME / on the remote controller or turn MASTER VOLUME dial on the unit to adjust the volume.

The volume can set to Min, 1 through 79, or Max.

About digital sound

If the equipment is digitally connected to the AV Receiver, the sound from the digital input will automatically be selected and reproduced instead of the analog sound as explained below.

The initial settings are as follows:

•When the DVD source is selected, the digital sound from the DIGITAL INPUT COAXIAL connector is reproduced.

•When the CD source is selected, the digital sound from the DIGITAL INPUT OPTICAL connector is reproduced.

See page 21 to change settings.

When the digital sound is reproduced, the ŸDIGITAL, DTS, or PCM (2 channel digital stereo) indicator lights up according to the received sound system in the AV Receiver’s display.

ŸDIGITAL PCM

DTS

When MD recorder is connected to the TAPE jacks, you can switch the source from TAPE to MD (see page 21).

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents HT-R8230 Avis Important Safety InstructionsPower PrecautionsFor U.S. models For Canadian modelsSupplied accessories FeaturesAmplifier Features FM/AM Tuner FeaturesUsing the Remote Controller Before Using the HT-R8230Index to parts and controls Index to parts and controls Antenna 14 Rear panelFront Speakers A, Center Speaker and Surround Speakers AC OutletPreset / button Remote controller= Mode buttons @ Adjust / buttonVideo Connecting to audio/video equipmentVCR Video Connecting to audio/video equipmentStandard speaker placement of the speaker system a Positioning speakers/Connecting speakersHow to connect to the speaker terminals Positioning speakers/Connecting speakersConnecting to the speaker system a Connecting to the speaker system BConnecting the supplied FM and AM indoor antennas Connecting antennasAdjusting the position of the FM indoor antenna Adjusting the position of the AM indoor antennaConnecting an Outdoor FM Antenna Connecting antennasConnecting an Outdoor AM Antenna Strip and prepare the 75 ohmPower on/ready function Connections for remote controlPower off function Direct change functionPress STANDBY/ON Enjoying music or videos with the HT-R8230Selecting a source Start playing the selected sourcePress Speaker Adjust twice Speaker setupSetting the crossover frequency Speaker setup → Subwoofer Mode 1 Default Setting the subwoofer mode Press Subwoofer Mode on the unitSubwoofer Mode Adjusting each speaker’s relative volume balance Test toneChanging the default settings according to your connections Tuning in a weak frequency only for FM stations Tuning into a radio station Press TunerListening to the radio There are two ways to select radio stationsSelecting preset stations Presetting radio stationsPress Tuner to switch the input source to the tuner Listening to the radioListening through headphones Muting the sound remote controller only Press MutingVarious functions common to all the sources Turning on/off the speaker system A/BChanging the display Press Display Using the sleep timer remote controller only Press SleepVarious functions common to all the sources To fix the Auto to DTS or PCM Setting the input signal formatEnjoying multi channel sources Using analog multi channel inputEnjoying the listening modes Press one of the listening mode buttons Selecting the listening modeInput source and available listening mode Enjoying the listening modesUsing the audio adjust functions Audio adjust functionAudio adjust function Recording a source Use the buttons as explained below Using the remote controller with your other AV componentsDVD mode Tape mode RCVR/TAPE Using the remote controller with your other AV componentsCD mode Amplifier Remote controller Symptoms Causes Remedies Pages TroubleshootingSymptoms Causes Remedies TroubleshootingTuner OtherAmplifier Section SpecificationsVideo Section Tuner SectionMemo Memo 3 4 3 8 6

HT-R8230 specifications

The Onkyo HT-R8230 is a versatile home theater receiver that brings high-quality audio and video performance to the home entertainment experience. Designed for both music lovers and movie enthusiasts, this model offers a range of features and technologies designed to transform any living space into a dedicated home theater.

At the heart of the HT-R8230 is its robust amplification system, which delivers powerful output through its multiple channels. With a 7.1 channel configuration, this receiver boasts an impressive 110 watts per channel at 8 ohms, allowing it to drive a variety of speaker setups effectively. This ensures that viewers can enjoy clear sound whether they're watching action-packed films or listening to their favorite music playlists.

One of the standout features of the Onkyo HT-R8230 is its advanced surround sound processing capabilities. It supports popular formats like Dolby Digital and DTS, providing an immersive audio experience that complements high-definition video sources. The built-in Audyssey MultEQ technology enhances sound calibration, customizing the audio output to suit the specific acoustics of the room, allowing for uniform sound distribution and clarity.

Connectivity is another strong suit for the HT-R8230. With multiple HDMI inputs, component video, and composite inputs, this receiver allows for seamless integration with various devices, from Blu-ray players and gaming consoles to streaming devices. The HDMI connections support 4K video pass-through, ensuring that users can enjoy cutting-edge video quality with compatible sources.

The Onkyo HT-R8230 also features an onboard radio tuner and supports various audio formats, including MP3 and WMA. Users can enjoy their favorite FM/AM radio stations or stream music from digital sources. Furthermore, this receiver incorporates zone 2 capabilities, allowing listeners to enjoy audio in different areas of the house, adding versatility to home entertainment.

Another notable characteristic is the remote control system, which provides easy navigation through settings and features, making it convenient for users to access their preferred audio and visual configurations. The user-friendly interface, combined with the ability to customize and save sound profiles, enhances the overall user experience.

Overall, the Onkyo HT-R8230 delivers a well-rounded combination of power, connectivity, and smart audio processing, making it a fantastic addition to any home theater system. Its ability to handle various multimedia sources while providing enriching sound quality positions it as a reliable choice for consumers seeking an affordable yet effective home entertainment solution.
Top Page Image Contents