Onkyo HT-R8230 appendix Enjoying multi channel sources, Using analog multi channel input

Page 27

Enjoying multi channel sources

SURROUND DIRECT

AUDIO SELECTOR DVD

TAPE

Before operating the remote controller,

DIRECT

press RCVR/TAPE.

 

SURROUND

CH SEL LEVEL

AUDIO SEL DVD

Using analog multi channel input

The multi channel input refers to a system, which is compatible with a source component equipped with analog 5.1-channel outputs (DVD player, MPEG decoder, etc.), reproducing the left/right front, center and left/right surround channels from five respective speakers and outputting the subwoofer channel from SUB WOOFER (refer to page 13).

1.Press DVD.

2.Press AUDIO SELECTOR on the unit or AUDIO SEL on the remote controller repeatedly to select “Multich”.

3.Turn on the component connected to the DVD (FRONT L/R, SURR L/R, CENTER and SUBWOOFER) port and start playing the desired media.

Check that the DVD player is set for multi channel output. See instruction manual supplied with your DVD player for details.

4.If necessary, press CH SEL on the remote controller to select an individual speaker. Then press LEVEL / to adjust the output level as desired.

Adjust the speaker output level so that you can hear the same sound level from each speaker at the listening position. For the front right, front left, center, surround right and surround left speakers, the output levels can be adjusted between –12 to +12 dB in 1 dB steps. The subwoofer can be adjusted between – 30 to +12 dB.

The volume levels from the speakers reproducing multi channel input source are independent from the speaker levels set using the test tone (page 20). These settings are not applied to speakers reproducing multi channel input source.

Applying the audio tone adjustment (Bass/Treble) effects to the audio

Before operating the remote controller, press RCVR/TAPE. Press DIRECT on the unit or remote controller to set “Tone Off”.

Press SURROUND on the unit or remote controller to set “Tone On”.

Refer to page 30 to adjust audio.

Notes

•“Multich” can be selected only when DVD is selected as the input source.

•The surround mode cannot be selected when “Multich” is selected. Also, if “Multich” is selected during use of a surround mode, it is canceled automatically.

•Regardless of the speaker configuration, the input signal will be output to each corresponding speaker. For example, even if the speaker configuration is set to 2 ch, sound comes from all speakers.

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents HT-R8230 Avis Important Safety InstructionsFor Canadian models PrecautionsPower For U.S. modelsFM/AM Tuner Features FeaturesSupplied accessories Amplifier FeaturesUsing the Remote Controller Before Using the HT-R8230Index to parts and controls Index to parts and controls AC Outlet Rear panelAntenna 14 Front Speakers A, Center Speaker and Surround Speakers@ Adjust / button Remote controllerPreset / button = Mode buttonsVideo Connecting to audio/video equipmentVCR Video Connecting to audio/video equipmentStandard speaker placement of the speaker system a Positioning speakers/Connecting speakersConnecting to the speaker system B Positioning speakers/Connecting speakersHow to connect to the speaker terminals Connecting to the speaker system aAdjusting the position of the AM indoor antenna Connecting antennasConnecting the supplied FM and AM indoor antennas Adjusting the position of the FM indoor antennaStrip and prepare the 75 ohm Connecting antennasConnecting an Outdoor FM Antenna Connecting an Outdoor AM AntennaDirect change function Connections for remote controlPower on/ready function Power off functionStart playing the selected source Enjoying music or videos with the HT-R8230Press STANDBY/ON Selecting a sourceSpeaker setup Setting the crossover frequencyPress Speaker Adjust twice Speaker setup Adjusting each speaker’s relative volume balance Test tone Setting the subwoofer mode Press Subwoofer Mode on the unit→ Subwoofer Mode 1 Default Subwoofer ModeChanging the default settings according to your connections There are two ways to select radio stations Tuning into a radio station Press TunerTuning in a weak frequency only for FM stations Listening to the radioListening to the radio Presetting radio stationsSelecting preset stations Press Tuner to switch the input source to the tunerTurning on/off the speaker system A/B Muting the sound remote controller only Press MutingListening through headphones Various functions common to all the sourcesUsing the sleep timer remote controller only Press Sleep Various functions common to all the sourcesChanging the display Press Display To fix the Auto to DTS or PCM Setting the input signal formatEnjoying multi channel sources Using analog multi channel inputEnjoying the listening modes Enjoying the listening modes Selecting the listening modePress one of the listening mode buttons Input source and available listening modeUsing the audio adjust functions Audio adjust functionAudio adjust function Recording a source Using the remote controller with your other AV components DVD modeUse the buttons as explained below Using the remote controller with your other AV components CD modeTape mode RCVR/TAPE Amplifier Remote controller Symptoms Causes Remedies Pages TroubleshootingOther TroubleshootingSymptoms Causes Remedies TunerTuner Section SpecificationsAmplifier Section Video SectionMemo Memo 3 4 3 8 6

HT-R8230 specifications

The Onkyo HT-R8230 is a versatile home theater receiver that brings high-quality audio and video performance to the home entertainment experience. Designed for both music lovers and movie enthusiasts, this model offers a range of features and technologies designed to transform any living space into a dedicated home theater.

At the heart of the HT-R8230 is its robust amplification system, which delivers powerful output through its multiple channels. With a 7.1 channel configuration, this receiver boasts an impressive 110 watts per channel at 8 ohms, allowing it to drive a variety of speaker setups effectively. This ensures that viewers can enjoy clear sound whether they're watching action-packed films or listening to their favorite music playlists.

One of the standout features of the Onkyo HT-R8230 is its advanced surround sound processing capabilities. It supports popular formats like Dolby Digital and DTS, providing an immersive audio experience that complements high-definition video sources. The built-in Audyssey MultEQ technology enhances sound calibration, customizing the audio output to suit the specific acoustics of the room, allowing for uniform sound distribution and clarity.

Connectivity is another strong suit for the HT-R8230. With multiple HDMI inputs, component video, and composite inputs, this receiver allows for seamless integration with various devices, from Blu-ray players and gaming consoles to streaming devices. The HDMI connections support 4K video pass-through, ensuring that users can enjoy cutting-edge video quality with compatible sources.

The Onkyo HT-R8230 also features an onboard radio tuner and supports various audio formats, including MP3 and WMA. Users can enjoy their favorite FM/AM radio stations or stream music from digital sources. Furthermore, this receiver incorporates zone 2 capabilities, allowing listeners to enjoy audio in different areas of the house, adding versatility to home entertainment.

Another notable characteristic is the remote control system, which provides easy navigation through settings and features, making it convenient for users to access their preferred audio and visual configurations. The user-friendly interface, combined with the ability to customize and save sound profiles, enhances the overall user experience.

Overall, the Onkyo HT-R8230 delivers a well-rounded combination of power, connectivity, and smart audio processing, making it a fantastic addition to any home theater system. Its ability to handle various multimedia sources while providing enriching sound quality positions it as a reliable choice for consumers seeking an affordable yet effective home entertainment solution.
Top Page Image Contents