3M™ Mobile Projector MP300
•There is a cutout on the bottom corner of the cover for the cable to exit. Route the cable down and to the right then close the cover.
The cover does not close properly.
•There is tab on the bottom corner of the cover. Make sure the tab inserts into the groove on the projector and the rest of the cover snaps into place.
Turning the Projector On or Off
The projector will not turn on.
•The battery is not charged. Plug the power adapter into the projector and try again. The projector button panel is on but the projector is not projecting an image.
•The video source (such as the DVD Player) is outputting a black image. First, try disconnecting the HDMI video cable. Do you see the 3M™ logo screen? If not, try turning off the projector and turning it on again. If you still do not see a 3M Logo screen while the status indicator is green, contact 3M for additional support.
•The Lamp is off. Press the Lamp ON/Off button on the remote control.
The remote control will not turn on the projector.
•When the projector is new and never been turned on, you must use the power button on the projector. Now you can turn on the projector by pressing the power
button on the projector or the remote control.
© 2012 3M. All Rights Reserved. | 37 |