3M X70, X80 Selecting The Aspect Ratio, Using The Automatic Adjustment Feature, At a M1-D signal

Operating (continued)

Selecting The Aspect Ratio

1	Press the Aspect button to toggle between the
	modes for aspect ratio.
	■ At a M1-D signal
	NORMAL	4:3	16:9

memo NORMAL keeps the original aspect ratio of the input signal.

■At a RGB signal (not M1-D)

4:3 16:9

■At a video signal

4:3 16:9 SMALL

memo At a HDTV signal of 1125i or 750p, only 16:9 can be selected.

LASER INDICATOR

STANDBY/ON VIDEO RGB

+ + +

LENS SHIFT FOCUS ZOOM

– – –

BLANK ASPECT LASER

PREVIOUSNEXT

MOUSE

ESC MENU

POSITION RESET AUTO

MAGNFY PinP VOLUME ON

FREEZE MUTE

OFF

KEYSTONE SEARCH

1 2 3

ID CHANGE

ASPECT button

Using The Automatic Adjustment Feature

memo The automatic adjustment operation requires approximately 10 seconds. Also, please note that it may not function correctly with some input.

1 Press the AUTO button.

■At a RGB signal

The Vertical position (V POSITION), the horizontal position (H POSITION), the clock phase (H PHASE) and horizontal size (H SIZE) will be automatically adjusted.

memo Make sure that the application window is set to its maximum size prior to attempting to use this feature. Dark pictures may still be incorrectly adjusted. Use a bright screen when adjusting.

■At a video signal

The signal type mode best suited for the respective input signal will be selected automatically.

memo This function is available only when the AUTO is selected to the item VIDEO of the INPUT menu. For a component video signal, the signal type is identified automatically independently of this function.

LASER INDICATOR

STANDBY/ON VIDEO RGB

+ + +

LENS SHIFT FOCUS ZOOM

– – –

BLANK ASPECT LASER

PREVIOUSNEXT

MOUSE

ESC MENU

POSITION RESET AUTO

MAGNFY PinP VOLUME ON

FREEZE MUTE OFF

KEYSTONE SEARCH

1 2 3

ID CHANGE

AUTO button

17