TURNING ON THE POWER
Precautions
Connect all devices to be used to the projector prior to turning on the power. 8 ～ 11
WARNING When the power is ON, a strong light is emitted. Do not look into the lens.
| STANDBY/ON |
VIDEO | RGB SEARCH |
ASPECT | AUTO BLANK |
MAGNIFY | VOLUME |
ON |
|
| MUTE |
OFF |
|
FREEZE | KEYSTONE |
Control panel
on off
video rgb
reset
lamp
keystone | temp |
power
1 | Make sure that the power cord is firmly and |
| correctly connected to the projector and outlet |
| 3 |
|
|
|
|
2 | Turn on the projector's power |
| Set the power switch to [ ] (ON). The projector will go |
to STANDBY mode and the power indicator will light to solid orange.
power switch
power indicator
menu
3 Press the STANDBY/ON button of remote control or the on/off button of control panel
•The projector begins warming up and the power indicator blinks green.
•The power indicator stops blinking
|
|
| and lights to solid green once the |
|
|
| projector's power is completely on. |
| NOTE | Turn the | |
|
| ||
power on/off in |
| ||
| |||
right order. |
| ||
•Power on the projector before the computer or video tape recorder.
•Power off the projector after the computer or video tape recorder.
14