Onkyo TX-SR674E, TX-SR8467 Rear Panel, Digital Optical in 1, 2, 3 and OUT, Hdmi in 1, 2, and OUT

Front & Rear Panels—Continued

Rear Panel

C (North American models only) J(Only some models)

1 B	D	5	6G	H	9
					VOLTAGE
					SELECTOR
					120V
					220-240V
N M V U T S R Q P O N					M L K

The page numbers in parentheses show where you can find the main explanation for each item.

ADIGITAL OPTICAL IN 1, 2, 3 and OUT

The optical digital audio inputs can be used to con- nect CD and DVD players, and other components with an optical digital audio output.

The optical output can be used connect a CD recorder or other digital recorder with an optical digital input.

BDIGITAL COAXIAL IN 1, 2

The coaxial digital audio inputs can be used to con- nect CD and DVD players, and other components with a coaxial digital audio output.

CXM antenna (on North American models)

This jack is for connecting an XM antenna, sold separately (see page 56).

DHDMI IN 1, 2, and OUT

HDMI (High Definition Multimedia Interface) con- nections carry digital audio and digital video.

The HDMI inputs are for connecting components with HDMI outputs, such as DVD players.

The HDMI output is for connecting a TV or projec- tor with an HDMI input.

EAM ANTENNA (21)

These push terminals are for connecting an AM antenna.

FFM ANTENNA (21)

This jack is for connecting an FM antenna.

GMONITOR OUT

The S-Video or composite video jack should be connected to a video input on your TV or projector.

HFRONT, CENTER, SURROUND & SURROUND BACK SPEAKERS (20)

These terminal posts are for connecting your front, center, surround, and surround back speakers.

IZONE 2 SPEAKERS (79)

These terminals are for connecting speakers in Zone 2.

JVOLTAGE SELECTOR (only some models)

This voltage selector provides compatibility with power systems around the world (see page 3).

KAC OUTLET

This switched AC outlet can be used to supply power to other AV components. The type of outlet depends on the country in which you purchased your AV receiver.

LIR IN (82)

If you want to use the remote controller to control the AV receiver from Zone 2, or if the AV receiver is installed in a cabinet and the line of sight between the AV receiver and the remote controller is obstructed, a commercially available IR receiver can be connected here.

M12V TRIGGER OUT ZONE 2 (81)

This output can be connected to the 12-volt trigger input on a power amplifier in Zone 2. When Zone 2 is turned on, a 12-volt trigger signal is output.

NPRE OUT SUBWOOFER (19)

The SUBWOOFER jack is for connecting a pow- ered subwoofer.

10