Onkyo TX-SR674E Supplied Accessories, Precautions, Make sure you have the following accessories

Page 4

Precautions—Continued

For British models

Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel.

IMPORTANT

The wires in the mains lead are coloured in accordance with the following code:

Blue: Neutral

Brown: Live

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured mark- ings identifying the terminals in your plug, proceed as follows:

The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.

The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

IMPORTANT

The plug is fitted with an appropriate fuse. If the fuse needs to be replaced, the replacement fuse must approved by ASTA or BSI to BS1362 and have the same ampere rating as that indicated on the plug. Check for the ASTA mark or the BSI mark on the body of the fuse.

If the power cord’s plug is not suitable for your socket outlets, cut it off and fit a suitable plug. Fit a suitable fuse in the plug.

For European Models

Declaration of Conformity

We, ONKYO EUROPE ELECTRONICS GmbH

LIEGNITZERSTRASSE 6, 82194 GROEBENZELL, GERMANY

declare in own responsibility, that the ONKYO product described in this instruction manual is in compliance with the corresponding technical standards such as EN60065, EN55013, EN55020 and EN61000-3-2, -3-3.

GROEBENZELL, GERMANY

K. MIYAGI

ONKYO EUROPE ELECTRONICS GmbH

Supplied Accessories

Make sure you have the following accessories:

Remote controller & two batteries (AA/R6)

Speaker setup microphone

Indoor FM antenna

AM loop antenna

Front

Left

Front

Left

SP-B /Zone2

Left

SP-B /Zone2

Left

Front

Right

Front

Right

SP-B /Zone2

Right

SP-B /Zone2

Right

Surround

Left

Surround

Left

Surround

Right

Surround

Right

Center

Center

SurroundBack

Left

SurroundBack

Left

Zone2

Left

Zone2

Left

SurroundBack

Right

SurroundBack

Right

Zone2

Right

Zone2

Right

Front

Left

Front

Left

SP-B / Zone 2

Left

SP-B / Zone 2

Left

Front

Right

Front

Right

SP-B / Zone 2

Right

SP-B / Zone 2

Right

Surround

Left

Surround

Left

Surround

Right

Surround

Right

Center

Center

Surround Back

Left

Surround Back

Left

Zone 2

Left

Zone 2

Left

Surround Back

Right

Surround Back

Right

Zone 2

Right

Zone 2

Right

1

2

3

Speaker Cable

Speaker cable labels

*

Power-plug adapter

Only supplied in certain countries. Use this adapter if your AC outlet does not match with the plug on the AV receiver’s power cord (adapter varies from country to country).

*How to mount the AC plug:

*In catalogs and on packaging, the letter at the end of the product name indicates the color. Specifications and operations are the same regardless of color.

4

Image 4
Contents TX-SR604/604E TX-SR8460 TX-SR674/674E TX-SR8467 Important Safety Instructions AvisPrecautions PowerFor models having a power cord with a polarized plug FCC Information for UserSupplied Accessories PrecautionsMake sure you have the following accessories Speaker cable labels Power-plug adapterTX-SR674/674E and TX-SR8467 Only FeaturesTX-SR604/604E and TX-SR8460 Only Table of Contents Front & Rear Panels Front PanelFront & Rear Panels Display Rear Panel Digital Optical in 1, 2, 3 and OUTXM antenna on North American models Hdmi in 1, 2, and OUTZone 2 Line OUT Installing the Batteries Remote ControllerAiming the Remote Controller Using the Remote Controller Remote ControllerRECEIVER/TAPE Mode Remote Mode buttons Buttons used when the Tuner input is selectedButtons used when the Tape input is selected Zone 2 buttonDVD Mode CD/MD/CDR/HDD Mode To select the input source, pressDISC/ALBUM +/- button Arrow / and Enter buttonsAbout Home Theater Enjoying Home TheaterConnecting the AV Receiver About AV ConnectionsOptical Digital Jacks AV Connection Color CodingConnecting the AV Receiver Connecting Your SpeakersSpeaker Connection Precautions Connecting the Speaker CablesRead the following before connecting your speakers Strip about 5/8 15 mmConnecting Antenna Connecting the Indoor FM AntennaConnecting the AM Loop Antenna Attach the FM antenna, as shown North American modelsConnecting an Outdoor AM Antenna Connecting an Outdoor FM AntennaUsing a TV/FM Antenna Splitter Connecting Both Audio & Video Which Connections Should I Use?Video Connection Formats Audio Connection FormatsConnecting Your TV or Projector Video ConnectionAudio Connection HintConnecting a DVD Player Hooking Up the Multichannel DVD Input DVD playerConnecting a VCR or DVD Recorder for Playback DVD recorderConnecting a VCR or DVD Recorder for Recording Satellite, cable, set-top box, etc Connecting a Camcorder, Games Console, or Other Device Connecting Components with Hdmi About HdmiSupported Audio Formats About Copyright ProtectionVideo Signal Flow Chart Audio Signal Flow ChartMaking Hdmi Connections TX-SR604/604E, TX-SR8460Connecting a CD Player or Turntable CD Player or Turntable MM with Built-in Phono Preamp StepConnecting a HDD-compatible Component Connect your HDD-compatible component’s analogAudio output jacks and video output jack to the AV Receiver’s Video 3 in L/R jacks and Video 3 JacksConnecting a Cassette, CDR, MiniDisc, or DAT Recorder Connecting Onkyo Components Connecting the Power Cord of Another ComponentAuto Power On/Standby Remote ControlConnecting the Power Cord Do the automatic speaker setup-this is essentialTurning On the AV Receiver Turning On and StandbyAutomatic Speaker Setup Audyssey2EQ First Time SetupMeasurement Points Connect the setup microphone to the Setup MIC jack First Time SetupPress Enter When the calculations are com Disconnect the speaker setupFollowing screen appears Plete, the following screenError Messages Speaker Detect ErrorsReviewing the Results Ambient noise is too highUsing a Powered Subwoofer Changing the Speaker Settings ManuallyPress the Return button to return to the previous menu Submenus About the Onscreen Setup MenusMain menu Digital Input Hdmi Video Setup Video InputSetup menu closes Component Video SetupMain menu appears onscreen Changing the Input Display Minimum Speaker Impedance not North American modelsTV Format Setup Not North American models AM Frequency Step Setup on some modelsHardware Setup menu appears You must specify the TV system used in your areaBasic Operations Selecting the Input SourceStart playback on the source component Video OUT, Hdmi OUT or Monitor OUTUsing the Multichannel DVD Input Adjusting the Bass & TrebleBasic Operations Displaying Source InformationUsing the Sleep Timer Setting the Display BrightnessUsing Headphones Muting the AV ReceiverUsing the Tuner Tuning into Radio StationsListening to the Radio Listening to the RadioPresetting AM/FM Stations XM Channels Selecting PresetsDeleting Presets Listening to the RadioWhat is RDS? Using RDS European models onlyRDS Program Types PTY Listening to Traffic News TP Displaying Radio Text RTFinding Stations by Type PTY Connecting the XM Passport System Listening to XM Satellite Radio North American models onlyImportant XM Radio Information About XM RadioSigning Up for XM Satellite Radio Setting the Satellite Radio ModeSelecting XM Satellite Radio Channel Search mode select any channel Selecting XM Radio ChannelsThere are three ways to select XM radio channels Receiver button flashesDisplaying XM Radio Information TER signal strength bar is as XM Radio MessagesPositioning the XM Passport System Long as possibleUsing the Listening Modes Selecting with the Remote ControllerSelecting Listening Modes Selecting on the AV ReceiverUsing the Listening Modes PCMAbout the Listening Modes Use this mode with any stereo movie e.g., TV, DVD, VHS Onkyo Original DSP ModesAV Recording RecordingRecording Separate AV Sources Using the CinemaFILTER Using the Late Night Function Dolby Digital onlyAdjusting Individual Speaker Levels Advanced OperationsSpeaker Setup Advanced SetupSpeaker Config menu appears Low-Pass Filter for the LFE Channel Advanced SetupDouble Bass Speaker Distance Tance, and then press EnterSpeaker Distance menu appears Buttons to select 2. Speaker DisRepeat until the volume Speaker Level CalibrationTest tone from each speaker Is the sameEqualizer Setting Settings, and then pressEqualizer Settings menu appears Buttons to select 4. EqualizerMultichannel DVD Input Settings Audio Adjust FunctionsWhen you’ve finished, press SW Input SensitivityInput Channel Settings PL IIx Music Mode SettingsNeo6 Music Mode Setting Dolby Digital EX Input Signal SettingTons on the remote controller to Assigning Listening Modes to Input SourcesUse the Input Selector but Select the input source that youIntelliVolume Volume Setup/OSD SetupUse the Up and Down Buttons to select a. IntelliVolume Lowed by the Setup button. The main menu appears onscreenChanging the AV Receiver’s ID Hdmi Audio OutLock Setup Digital Input Signal FormatsPress and hold the AV receiver’s Digi TAL Input button for about 3 secondsChanging the Remote Controller’s ID Correcting Sound and Picture SyncPress the Receiver and the Cine Fltr at the same timeConnecting Zone Using a Receiver/Integrated Amp in ZoneUsing Only Speakers in Zone ZoneSetting the Powered Zone Buttons to select Powered ZoneControlling Zone 2 with the Remote Controller Using ZoneControlling Zone 2 from the AV receiver Using the Remote Control in Zone Adjusting the Volume for ZoneUsing a Multiroom Kit with Zone Using a Multiroom Kit with a CabinetEntering Remote Control Codes Controlling Other ComponentsRemote Control Codes for Onkyo Components Connected via Resetting Remote Mode ButtonsResetting the Remote Controller Controlling Other ComponentsTV VOL CH +Specifications Amplifier SectionVideo Section Tuner SectionTroubleshooting Troubleshooting Remote controller doesn’t work There’s no picture from a source connected to an HdmiOnscreen menus don’t appear Immediate display does not appearSound changes when I connect my head- phones Speaker volume cannot be set as requiredThere’s no sound Speaker distance cannot be set as requiredMemo Onkyo Europe Electronics GmbH Onkyo Europe UK Office