3M MP8740 manual Setup

ENGLISH

4.3 SETUP

The SETUP sub-menu is used to adjust and move the image position. The projector will display either the RGB (Figure 4.4) or Video (Figure 4.5) menu according to the input source being projected.

RGB signal input Video signal input

Figure 4.4 RGB Signal			Figure 4.5 Video Signal
Adjustment Item	Details of adjustment			Default
VOLUME	Decrease	Increase
BRIGHT	Dark	Bright
(BRIGHTNESS)
CONTRAST	Lower	Higher
SHARPNESS	Soft	Sharp
COLOR	Less	More
TINT	Red	Green
V.POSIT	Moves the picture up or down.
(V.POSITION)
H.POSIT	Moves the picture left or right.
(H.POSITION)
H.PHASE	Decreases the picture flicker
H.SIZE	Widens or Narrows the horizontal size of picture
COLOR BAL	Red	Blue

✔Note

•TINT cannot be adjusted with a PAL or M-PAL video signal input.

•TINT, COLOR and SHARPNESS cannot be adjusted with an RGB signal input.

•V. POSIT, H. POSIT, H. PHASE and H. SIZE cannot be adjusted with a VIDEO signal input.

10 3M™ Multimedia Projector MP8740 © 3M 1999