A.6 Indicator Status
The ON, LAMP and TEMP indicators will light or blink in the following cases:
| Indicator status | Meaning | Remedy | |
|
|
|
| |
| Lights orange | Standby mode | normal | |
|
|
|
| |
ON indicator | Blinks green | During warming up | normal | |
|
|
| ||
Lights green | During operation | normal | ||
| ||||
|
|
|
| |
| Blinks orange | During cooling down | normal | |
|
|
|
| |
LAMP indicator | Lights red | Lamp cannot light | Cool projector by power off for 20 minutes. | |
|
|
| ||
Blinks red | Air filter open | Ensure filter is closed. | ||
| ||||
|
|
|
| |
TEMP indicator | Lights red | Temperature inside too high | Let projector cool 20 minutes. Check air flow and filter. | |
|
|
| ||
Blinks red | Cooling fan not operating | call your dealer | ||
| ||||
|
|
|
|
*When the LAMP indicator lights or blinks, turn the power off. If the problem persists, contact your dealer.
TECHNICAL
A.6
3M™ Multimedia Projector MP8740 | © 3M 1999 |