Installing and Composition
Basic Operation of the Projector
1.Place the projector on a sturdy and horizontal surface with the PC or AV source.
2.Place the projector with the desired distance from the screen. The distance between the projector and the screen determines the actual size of the image.
3.Position the projector so that the lens is set at a right angle to the screen. If the projector is not set at a right angle, the screen image will be crooked. If this is so then the keystone adjustment may correct this (Refer to page 21.).
4.Connect the cables of the projector to a wall power socket and other connected sources.
projection distance based on the picture format
X/2
Screen height (X)
X/2
Y/2
Screen Width (Y)
Screen
Projection
Projection distance (D)
Screen
43mm
Y/2
Projection distance (D)
4 : 3 Scale
Diagonal Size
(inch)
Diagonal Size
(mm)
Horizontal Size
(mm)
Vertical Size | Projection Distance(D) |
(mm)(mm)
12