LG Electronics HS101 Turning on the Projector, Turning off the Projector, Selecting source mode

Page 14

Installing and Composition

Turning on the Projector

1.Connect power cord correctly.

2.Press the POWER button( ) on the Control panel. (The light on the control panel will be turned on.)

●Use the SOURCE button on the control panel to select the input signal you want.

●When you press the POWER button( ) on the control panel when you turn on the projector, the lights for all buttons on the control panel will be turned on.

Turning off the Projector

1.Press the POWER button( ) on the Control panel.

2.Press the POWER button( ) on the Control panel again to turn off the power.

●When you press the POWER button( ) on the control panel when you turn off the projector, the lights for all the but- tons on the control panel will be turned off. When you press any button on the control panel when the projector is turned off, the light only on the POWER LED will be turned on. (When the Power cord is connected.)

Power off?

Please Press Key Again.

Focus and Position of the Screen Image

When an image appears on the screen, check if it is in focus and fits well to the screen.

Focus ring

●To adjust the focus of the image, rotate the focus ring which is the outer ring on the lens.

Selecting source mode

1. Press the SOURCE button.

Select

FRGB

OK

G

2. Each press of the F, G button changes the display as below.

RGB

Digital Video

Video

●When you connect the RGB to Component cable to the RGB IN (PC/DTV) terminal and select RGB input, you can receive the Component input.

●Digital video is the signal to receive and display the digital video signal through the HDMI jack.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents HS101 DLP Projector Contents Safety Instructions Do not allow any objects to fall into the projector Do not use too many plugs on the Mains multi-outletBe damaged Do not place heavy objects on top of projector Do not use water while cleaning the projectorDo not drop the projector or allow impact shock Main Body Connecting PartNames of parts Control Panel Accessories Optional ExtrasInstalling and Composition Installing and CompositionInstallation Instructions This may cause overheating of the projectorHow to install the projector using the tripod Basic Operation of the Projector Projection distance based on the picture formatUsing Kensington Security System Turning off the Projector Selecting source modeTurning on the Projector Focus and Position of the Screen ImageConnecting to a Video Source Connecting to a Desktop PCConnecting to a Notebook PC ConnectionUse a DTV receiver with DTV 480p576p/720p/1080i mode Connecting to a DVDConnecting to a D-TV Set-Top Box Cable Use a DTV receiver with DTV 480p576p/720p/1080i modeAPC Auto Picture Control Adjusting VideoFunction FunctionAuto Color Temperature Control Gamma FunctionKeypad LED Function Black level FunctionKeypad Sound Function Flip Horizontal Function Using ARC FunctionSelecting Language Then use F , G button to selectAltitude Mode Function Using Keystone FunctionLED Mode Function Flip Vertical FunctionUsing Phase Function Auto Configure FunctionUsing Clock Function Using Horizontal Function Using Vertical FunctionSupported Monitor Display MaintenanceDVD/DTV Input Signal InformationHS101 HS101-JE SpecificationsOperating Condition Temperature Humidity
Top Page Image Contents