Onkyo TX-NR3008 instruction manual Input/Output Assign, Monitor Out, OUT Main, Out Sub

Explanatory Notes
a	Main Menu	Speaker Setup

b■ Subwoofer

c `1ch:

Audio signal is outputted from SW1 jack only.

`2ch:

Audio signal is outputted from SW1 and

SW2 jacks.

aMenu selection

bSetting target

cSetting options (default setting underlined)

Input/Output Assign

Main Menu Input/Output Assign

Monitor Out

On the “Monitor Out” settings, you can select whether or not to have the video sources’ images output through the HDMI output, as well as whether to have the onscreen setup menu output through the HDMI output or through an analog output.

If you connect your TV to HDMI output, “Monitor Out” setting is automatically set so that the onscreen setup menus are displayed and composite video, S-Video, and component video sources are upconverted* and output.

Composite video, S-Video,
component video	HDMI
IN
OUT
Composite video, S-Video,	HDMI
component video

If you connect your TV to the COMPONENT VIDEO MONITOR OUT (not the HDMI output), “Monitor Out” setting is automatically set so that the onscreen setup menus are displayed and composite video and S-Video sources are upconverted* and output.

Composite video, S-Video Component video

IN

OUT

Composite video, S-Video Component video

Note

•See “Video Connection Formats” (➔ 25) for charts showing how the “Monitor Out” and “Resolution” settings (➔ 48) affect the video signal flow through the AV receiver.

■Monitor Out

`Analog:

Select this if your TV is connected to the COMPO-

NENT VIDEO MONITOR OUT, MONITOR OUT S, or MONITOR OUT V.

`HDMI Main:

Select this if your TV is connected to the HDMI

OUT MAIN.

`HDMI Sub:

Select this if your TV is connected to the HDMI

OUT SUB.

`Both:

Select this if your TVs are connected to the HDMI OUT MAIN and HDMI OUT SUB. Video signals are output from both HDMI outputs at the resolution supported by both TVs.

`Both(Main):

Select this if your TVs are connected to the HDMI OUT MAIN and HDMI OUT SUB. Video signals are output from both HDMI outputs but HDMI OUT MAIN will become a priority; depending on the reso- lution, video signals may not be output from HDMI OUT SUB.

`Both(Sub):

Select this if your TVs are connected to the HDMI OUT MAIN and HDMI OUT SUB. Video signals are output from both HDMI outputs but HDMI OUT SUB will become a priority; depending on the reso- lution, video signals may not be output from HDMI

OUT MAIN.

Note

•If not connected to the same output you have selected in the

“Monitor Out” setting, the “Monitor Out” setting will be auto- matically switched to “Analog” (➔ 26).

•When you select other than “Analog”, the onscreen setup menus are output by only the HDMI output. If you’re not using the

HDMI output and select settings by mistake and the menus disappear, press AV receiver’s MONITOR OUT to select “Analog”.

•For Deep Color output, if the “Monitor Out” setting is set to “Both(Main)” or “Both(Sub)”, the number of bit may be lim- ited due to the capability of your TV connected to a priority out- put.

Changing “Monitor Out” setting manually

1 Press MONITOR OUT on the front panel.

The current setting is displayed.

2 Press MONITOR OUT on the AV receiver repeatedly to select:

`Analog, HDMI Main, HDMI Sub, Both, Both(Main) or Both(Sub)

En

47