Onkyo TX-NR3008 instruction manual About USB, USB Mass Storage Device Requirements

Page 78

About USB

USB can be used to play music files stored on USB mass storage devices (e.g., USB flash drives and MP3 players), which can be plugged into the AV receiver’s USB port.

See “Controlling iPod” for iPod connection (➔ 86).

USB port

(TX-NR5008) USB port

Supported Audio File Formats

For USB mass storage device playback, the AV receiver supports music file formats.

See “Supported Audio File Formats” (➔ 74).

USB Mass Storage Device Requirements

•The AV receiver supports USB devices that support the USB mass storage device class.

•Playback may not be possible with some USB devices even if they conform to the USB mass storage device class.

•USB devices formatted with the FAT16 or FAT32 file system are supported.

•If the storage device has been partitioned, each section will be treated as an independent device.

•Each folder may contain up to 20000 music files and folders, and folders may be nested up to 16 levels deep.

•USB hubs and USB devices with hub functions are not supported.

Playing Music Files on a USB Device

This section explains how to play music files on a USB mass storage device.

En

DISPLAY

NET/USB

ENTER

q/w/e/r

RETURN

1, 3, 2, 5, 4, 7, 6

REPEAT

RANDOM

1 Plug your USB mass storage device into the AV receiver’s USB port.

2 (TX-NR5008)

Press NET/USB repeatedly to select the “USB(Front)” or “USB(Rear)” screen.

(TX-NR3008)

Press NET/USB repeatedly to select the “USB” screen.

USB(Front)

USB Storage

1 / 1

The USB indicator lights (➔ 9) if the AV receiver is able to read the USB mass storage device. The USB indicator flashes if the AV receiver cannot read the USB mass storage device.

3 Use q/wto select a USB mass storage device, and then press ENTER.

A list of the device’s contents appears.

USB Storage

Folder1

Folder2

01_Song_Track1

02_Song_Track2

03_Song_Track3

04_Song_Track4

05_Song_Track5

06_Song_Track6

07_Song_Track7 08_Song_Track8

1 / 10

To open a folder, use q/wto select it, and then press

ENTER.

78

Page 77 Page 79
Image 78
Page 77 Page 79
Contents TX-NR5008 TX-NR3008 Board above the apparatus shall be set 10 cm Always consider the environmental issues and follow10 cm 4 at the rear. The rear edge of the shelf or Away from the rear panel or wall, creating a flue-likePrecautions Installing the Batteries Supplied AccessoriesUsing the Remote Controller Aiming the Remote ControllerContents Processing FeaturesAmplifier MiscellaneousTHX Ultra2 Plus V.Color is a trademark of Sony CorporationMusic Optimizer is a trademark of Onkyo Corporation Front Panel Pure Audio button Hdmi Thru indicatorFront & Rear Panels ON/STANDBY buttonPhones jack Zone 2, Zone 3 and OFF buttons Return button Setup MIC jackDisplay AUX Input jacks HDMI, VIDEO, Audio L/R and Digital 21Zone 2 and Zone 3 12V Trigger OUT jacks Ethernet port UREMOTE Control jackRear Panel Front L/R, CENTER, Surr L/RRemote Controller Controlling the AV ReceiverAbout Home Theater Enjoying Home TheaterAbout Speakers a and Speakers B Connecting the AV ReceiverConnecting Your Speakers Speakers a 7.2-channel playback Speakers B Stereo playbackRead the following before connecting your speakers Speaker ConfigurationSpeaker Connection Precautions Attaching the Speaker Cable LabelsChannel Playback with Speakers a Connecting the Speaker CablesScrew-type speaker terminals Strip 1/2 to 5/8 12 to 15 mm To 5/812 to 15 mmChannel Playback with Speakers a or Speakers B Center Speaker BUsing Dipole Speakers Connecting the Powered SubwoofersBi-amping the Front Speakers a Bi-amping the Front Speakers B Speakers TypeFront B setting to Bi-Amp to enable biampingBridging the Front Speakers a Front L/R and Surr BACK/ZONE 3 L/R terminalsConnecting a Power Amplifier Bridging the Front Speakers BSpecify None for the channel that you don’t want to output AV Cables and Jacks About AV ConnectionsConnected image with AV components Hdmi cableConnecting Your Components with Hdmi Jack Signal Components AssignableAudio return channel ARC function Connecting Your Components Front RearAuto Power On Connecting Onkyo uComponentsHow to record the video Remote ControlNorth American European and Asian Models Connecting AntennaConnecting the Power Cord AC InletWhich Connections Should I Use? Video Connection FormatsDepends on the Audio TV Out setting Monitor Out setting set to AnalogFor details, refer to Video Resolution Chart Audio Connection FormatsTurning On Standby indicatorTurning On/Off the AV Receiver Turning OffBasic Operations Selecting the Language Used for the Onscreen Setup MenusSetting the Display Brightness Playing the Connected ComponentMuting the AV Receiver Using the Sleep TimerSpeakers a or Speakers B Configuration Selecting Speaker LayoutUsing the Home Menu Starting Components Using Activities Using HeadphonesUsing Activities to Start Easy Macros Changing the Input DisplayUsing Audyssey MultEQ XT32 Audyssey MultEQ XT32 Room Correction and Speaker SetupRestoring Default Turning Off the ComponentsEnter Error Messages Changing the Speaker Settings ManuallyUsing a Powered Subwoofer Listening to the Radio Using the TunerTuning into Radio Stations Listening to the RadioPresetting FM/AM Stations Using RDS excluding North American modelsFinding Stations by Type PTY Listening to Traffic News TPRDS program types PTY Recording Separate AV Sources Connecting a Recording ComponentRecording AV RecordingUsing the Listening Modes Listening Mode ButtonsSelecting Listening Modes Input Source About Listening ModesExplanatory Notes Speaker LayoutListening Modes DTS-HD Master Resolution AudioDescription Input Speaker Source Layout DTS-HD High AudioListening Mode Description Input Speaker Source Layout Music *6 Modes can be usedNeural Digital Sources such as MP3s and Internet streamsOnkyo-Original DSP Listening Modes Common Procedures in Setup Menu Advanced SetupOn-screen Setup Menus MenuOUT Main Input/Output AssignMonitor Out OUT SUBResolution Hdmi InputBD/DVD, VCR/DVR, CBL/SAT, GAME, PC, Tape TV/CD, PHONO, Port Component Video Input ` in 1, in 2,Input to Port selector Digital Audio Input Speaker SetupSpeaker Settings Analog Audio InputSpeakers TypeFront a Powered Zone 2, Powered ZoneSpeaker Impedance Speakers TypeFront BSpeaker Distance Subwoofer 1*1, Subwoofer 2*1*2 Equalizer SettingsLevel Calibration EqualizerMultiplex/Mono Audio AdjustTHX Audio Setup BGCDolby Theater-Dimensional Audyssey DSXLFE Level Audyssey Source SetupDirect DSDDynamic Volume IntelliVolume SyncName Edit Picture Adjust Random NR*2*3*4*6 Resolution*2*4Mosquito NR*2*3*4*6 Block NR*2*3*4*6Listening Mode Preset DTS/DTS-ES/DTS-HDVolume Setup OSD SetupMiscellaneous Remote ID Hardware SetupSirius Settings North American models Multi ZoneAudio Return Channel Power ControlHdmi ControlRIHD TV ControlLock Setup Using the Audio SettingsSpeaker Levels Audyssey SettingsDolby Volume Late NightScreen Centered Dialog Re-EQAudio Selector ` PCM Setting the Incoming Digital Signal Fixed ModeFixed Mode ` DTSConnecting the AV Receiver About NETNetwork Requirements Listening to vTuner Internet Radio Click on the Preset Internet Radio tabListening to Internet Radio Listening to Other Internet RadioPlaying Music Files on a Server Registering Presets*1Station and Song Presets Items on the Internet Radio Top MenuWindows Media Player 11 Setup WAV Supported Audio File FormatsWMA AACServer Requirements Windows Media Player 12 SetupRemote Playback from Media Server/ Personal Computer About DlnaNetwork Settings Using Remote PlaybackDhcp USB Mass Storage Device Requirements List of the device’s contents appearsAbout USB Playing Music Files on a USB DeviceFolder1 02SongTrack2 Artist Album 011234 Connecting Your Zone 2 Speakers to an Amp in Zone Connecting ZoneConnecting Your Zone 2 Speakers Directly to the AV receiver Multi ZoneConnecting Your Zone 3 Speakers Directly to the AV receiver Zone 2 Video OutputZone 2 12V Trigger Zone 3 12V Trigger Setting the Powered Zone 2/3Connecting Your Zone 3 Speakers to an Amp in Zone Front WIDE/ZONE 2 L/R or SurrSetting the Multi Zone Using Zone 2/3Controlling Zone 2/3 from the AV receiver Adjusting the Tone and Balance of Zones Controlling Zone 2/3 with the Remote ControllerAdjusting the Volume for Zones Muting ZonesUsing a Multiroom Kit with Zone 2/3 Using a Multiroom Kit with a CabinetUsing a Multiroom Kit with Other Components Extended Mode control Connecting the iPod Directly to the USB PortStandard Mode control Controlling iPodModels sold are different depending on the region Connecting an Onkyo DockTX-NR5008 TX-NR3008 Onkyo Dock CableUsing the Onkyo Dock UP-A1 DockWithout the RI Control Controlling Your iPodRI Dock With the RI ControlUDock Available buttonsOnkyo Dock Buttons UP-A1 Dock E/rENTER PLAYLISTe/rPreprogrammed Remote Control Codes Looking up for Remote Control CodeControlling Other Components Model number input panel appears Use q/wto select Search by model numberVia network, and then press Enter Or if you are not sure about the exact modelRemote Mode BD/DVD Entering Remote Control CodesRemote Control Codes for Onkyo Components Connected via u TapeYou can reset the remote controller to its default settings Resetting Remote Mode ButtonsResetting the Remote Controller Controlling Other ComponentsTV VOL q/w Components ButtonsCassettetape deck CH + Disc +Activities Setup Following buttons cannot learn new commands Learning CommandsRemote Mode button flashes twice Remote MODE, ALL OFF, MY MOVIE, MY TV, MY Music and ModeMaking Macros Using Normal MacrosDeleting Learning Commands Running MacrosThere’s no sound, or it’s very quiet TroubleshootingStandby indicator flashes red Can’t turn on the AV receiverAbout DTS signals There’s no sound with a certain signal formatCan’t select the Pure Audio listening mode Only the center speaker produces soundThere’s no picture Remote controller doesn’t workBeginning of audio received by an Hdmi in can’t be heard There’s no picture from a source connected to an HdmiCan’t access the music files on a USB device Can’t learn commands from another remote controllerCan’t access the server or Internet radio Can’t control other componentsSpeaker distance cannot be set as required Stand-by power consumptionSound changes when I connect my headphones Display doesn’t workImportant Note Regarding Video Playback Nent Video Monitor OUTGeneral Specifications TX-NR5008Amplifier Section Tuner Section Video SectionAudio Inputs Audio OutputsOthers Specifications TX-NR3008 107108 About Hdmi Supported Audio FormatsAbout Copyright Protection Using an RIHD-compatible TV, Player, or Recorder About p-compatible componentsOperations that can be performed with p connection Confirm the settings How to connect and setupConfirm the connecting and setting Operate with the remote controllerUpdating the Firmware via Network Firmware UpdateUpdate procedure Before you startTroubleshooting Errors during update via NetworkUpdating the Firmware via USB Errors during update via USB Video Resolution Chart OutputOnkyo Europe Electronics GmbH Onkyo Europe Electronics GmbH UK Branch
Related manuals
Manual 2 pages 42.89 Kb

TX-NR3008 specifications

The Onkyo TX-NR3008 is a high-performance A/V receiver that has garnered attention for its impressive array of features and advanced technologies. As part of Onkyo's acclaimed line of home theater receivers, the TX-NR3008 is designed to deliver an immersive audio and video experience, making it an ideal choice for audiophiles and home theater enthusiasts alike.

One of the standout features of the TX-NR3008 is its powerful amplifier section, capable of delivering 135 watts per channel (8 ohms) across all seven channels. This ensures rich, dynamic sound reproduction, whether you are watching your favorite movies or listening to music. The receiver also supports 9.2-channel surround sound, allowing users to add external amplifiers to create a more expansive soundstage.

In terms of audio processing, the TX-NR3008 incorporates advanced DTS-HD Master Audio and Dolby TrueHD formats, which provide lossless audio quality for a truly cinematic experience. Additionally, the receiver is equipped with Onkyo's proprietary AccuEQ room calibration technology, which analyzes the acoustics of your space and optimizes sound output accordingly. This ensures that every listener experiences superior sound quality, regardless of seating position.

The TX-NR3008 also offers an array of connectivity options. With six HDMI inputs, including support for 3D video and 4K resolution, users can easily connect various devices, such as Blu-ray players, gaming consoles, and streaming devices. The HDMI capabilities extend to audio return channel (ARC) functionality, making it convenient to connect with smart TVs. The receiver also provides legacy support with composite and component video inputs, as well as digital optical and coaxial audio inputs.

Another notable feature is its built-in internet streaming capabilities, allowing users to access popular music services like Pandora, Spotify, and SiriusXM right from the receiver. Its compatibility with Wi-Fi and wired Ethernet connections adds further versatility, enabling the TX-NR3008 to be incorporated into multi-room audio setups.

In summary, the Onkyo TX-NR3008 is a formidable A/V receiver that excels in delivering top-notch audio and video performance. Its robust amplification, advanced surround sound processing, extensive connectivity options, and streaming capabilities make it an exceptional choice for anyone looking to create an immersive home theater experience. With its blend of power, precision, and versatility, the TX-NR3008 remains a strong contender in the competitive market of high-end A/V receivers.
Top Page Image Contents