APPENDIX
10. Sharpness (Command: k k)
To adjust the screen sharpness.
You can also adjust sharpness in the Picture menu.
Transmission [k][k][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
Refer to ‘Real data mapping 1 ’. See page 67.
Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]
11. OSD Select (Command: k l)
To select OSD (On Screen Display) on/off when controlling remotely.
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 00: OSD off
Data 01: OSD on
Acknowledgement [l][ ][Set ID][ ][OK][Data][x]
12.Remote Control Lock/Key Lock Mode (Command: k m) To lock the remote control and the side key controls on the set.
Transmission [k][m][ ][Set ID][ ][Data][Cr]
Data 00: Lock off | Data 01: Lock on |
Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]
13.Balance (Command: k t) To adjust balance.
You can also adjust balance in the Audio menu. Transmission [k][t][ ][Set ID][ ][Data][Cr]
15.Red Adjustment (Command: k v) To adjust red in colour temperature.
Transmission [k][v][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 3C
Refer to ‘Real data mapping 2’. See page 67.
Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x]
16.Green Adjustment (Command: k w) To adjust green in colour temperature.
Transmission [k][w][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 3C
Refer to ‘Real data mapping 2’. See page 67.
Acknowledgement [w][ ][Set ID][ ][OK/NG][Data][x]
17.Blue Adjustment (Command: k $) To adjust blue in colour temperature.
Transmission [k][$][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 3C
Refer to ‘Real data mapping 2’. See page 67.
Acknowledgement [$][ ][Set ID][ ][OK/NG][Data][x]
18.Abnormal State (Command: k z) To recognize an abnormal state.
Transmission [k][z][ ][Set ID][ ][FF][ ][Cr]
Data FF: Read
Data Min : 00 ~ Max : 64
Refer to ‘Real data mapping 1 ’. See page 67.
Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]
14. Colour Temperature (Command: k u)
To adjust colour temperature.
You can also adjust Colour Temperature in the Picture menu.
Transmission [k][u][ ][Set ID][ ][Data][Cr]
Data 00: Medium 01: Cool 02: Warm(Don’t operate in RGB, DVI mode)
Data 05: 9300K 06: 6500K 07: sRGB(Operate in RGB, DVI mode)
Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement [z][ ][Set ID][ ][OK/NG][Data][x] Data 00: Normal (Power on and signal exist)
Data 01: No signal (Power on)
Data 02: Turn the set off by remote control
Data 03: Turn the set off by sleep time function
Data 04: Turn the set off by
66