LG Electronics M2794A, M2394A owner manual Lsb

APPENDIX

19 . Auto Configure (Command: j u)

To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode.

Transmission [j][u][ ][Set ID][ ][Data][Cr]

Data 01: To set

Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]

22. Channel Skip(Command: m b)

G To set skip status for the current Programme.

Transmission [m][b][ ][Set ID][ ][Data][Cr]

Data 00 : Skip 01 : Add

Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]

20. Equalize(Command: j v)

G To adjust equalize.

Transmission [j][v][ ][Set ID][ ][Data][Cr]

MSB									LSB
0	0		0	0	0	0		0	0
		Frequency					Data

23.Key Code (Command: m c) To send IR remote key code.

Transmission [m][c][ ][Set ID][ ][Data][Cr]

Data: Key code - Refer to page 61.

Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]

Frequency

7	6	5	4	Hex	Remark
0	0	0	0	0	1’st Band
0	0	1	0	2	2’nd Band
0	1	0	0	4	3’rd Band
0	1	1	0	6	4’th Band
1	0	0	0	8	5’th Band

Data

3	2	1	0	Step
0	0	0	0	0
0	0	0	1	1
0	0	1	0	2
...	...	...	...	...
1	1	1	1	F

24.Input select (Command: x b) (Main Picture Input)

To select input source for set

Transmission [x][b][ ][Set ID][ ][Data][Cr]

Data: Structure

MSB									LSB
0		0	0	0	0		0	0	0
	External Input					Input Number

Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x]

21 . Tune Command / Channel Tuning (Command: m a) Tune Channel to following Physical number.

Transmission [m][a][ ][Set ID][ ][Data0][ ][Data1] [ ][Data2][Cr]

Data00 Min: 00 ~ Max: 63 (Max : C8 in China area) (*transmit by Hexadecimal code)

Data01 don’t care

Data02 0 ; Main

1 : Sub

Acknowledgement [a][ ][Set ID][OK][ ][Data0][Data1][x] [a][ ][Set ID][NG][ ][Data0][x]

	Input	command
	TV	[x][b][ ][Set ID][ ][10][Cr]
	AV	[x][b][ ][Set ID][ ][20][Cr]
	Component	[x][b][ ][Set ID][ ][40][Cr]
	RGB-PC	[x][b][ ][Set ID][ ][60][Cr]
	DVI	[x][b][ ][Set ID][ ][80][Cr]
	HDMI1	[x][b][ ][Set ID][ ][90][Cr]
	HDMI2	[x][b][ ][Set ID][ ][91][Cr]
	Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
* Real data mapping 1			* Real data mapping 2
	00 : Step 0		00 : -30
	32 : Step 50		1E : 0
	64 : Step 100		3C : +30

67