LG Electronics L1972H manual Phase, Setup Language, Factory Reset

Page 15

On Screen Display (OSD) Selection and Adjustment

Main menu

Sub menu

Description

TRACKING

 

T R A C K I N G

CLOCK To minimize any vertical bars or stripes

 

visible on the screen background.

 

The horizontal screen size will also

 

change.

 

PHASE

MENU : Exit

 

- : Decrease

 

+ : Increase

SHARPNESS

SET : Select another sub-menu

 

To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters.

To adjust the clearness of the screen.

SETUP LANGUAGE

To choose the language in which the control names are displayed.

S E T U P

S E T U P

OSD POSITION

WHITE BALANCE

POWER INDICATOR

To adjust position of the OSD window on the screen.

If the output of the video card is different the required specifications, the color level may deteriorate due to video signal distortion. Using this function, the signal level is adjusted to fit into the standard output level of the video card in order to provide the optimal image. Activate this function when white and black colors are present in the screen.

Use this function to set the power indicator on the front side of the monitor

MENU : Exit

- : Adjust

+ : Adjust

SET : Select another sub-menu

FACTORY

RESET

to ON or OFF.

If you set OFF, it will go off.

If you set ON at any time, the power indicator will automatically be turned on.

Restore all factory default settings except

"LANGUAGE."

Press the - button to reset immediately.

If this does not improve the screen image, restore the factory default settings.

If necessary, perform the white balance function again. This function will be enabled only when the input signal is an analog signal.

A14

Image 15
Contents L1972H On Safety Important PrecautionsOn Disposal On InstallationOn Cleaning On RepackingUnfolding the stand base Connecting the DisplayFolding the stand base Tilt rangeTilt Range 0˚~30 Ergonomic Scope of adjusting the height maximum 4.02 inches 102 mm To adjust the heightConnect Dsub Cable Mac Using the ComputerTo arrange the cables Zooming Control Panel FunctionsFront Panel Controls Bottom Control FunctionAUTO/SET Auto Image AdjustmentScreen Adjustment On Screen Display OSD Control AdjustmentMain menu Sub-menu Reference On Screen Display OSD Selection and AdjustmentPress the Menu Button, then the main menu of the OSD appears RED GreenBlue Language PhaseSetup Language Factory ResetUser MovieText SETOSD Unlocked will appear TroubleshootingIs the power cord of the display connected? Do you see OSD Locked when you push Menu button?Display image is incorrect Screen color is mono or abnormal Screen blinksSpecifications Indicator Preset Modes ResolutionWall mount plateSeparate purchase Installing the Wall mount plateKensington Security Slot Digitally yours