Linking U-Series Monitors by Daisy Chaining

NETWORK MONITOR INSTALLATION 7

3. Linking U-Series Monitors by Daisy Chaining

ENGLISH

Server PC				Primary Station
Server PC				Primary Station

USB Cable

Station 1

USB Cable

USB-type Mouse	Station 2	Station 3
(sold separately)

1Connect the USB mouse port (located at the back of the monitor) of the first U-Series monitor to the up- streaming port of the second monitor using an A-B-type USB cable.

2Connect the second and the third Station in the same way.

CAUTION

yyConnecting the monitors in a daisy chain may require more energy than a standard configuration, as illustrated in section 2. When playing a video, it is recommended to connect up to two standard sta- tions in addition to the primary station.

yyWhen using a daisy chain, connect the mouse to the USB port on the left at the back of the monitor. yyWhen using a daisy chain, select "Off" for "POWER OFF OSD" to prevent the chain effect of all

connected stations powering off. See page 20 in "Owner's Manual" for the POWER OFF OSD settings.