ENGLISH
10 ASSEMBLING AND PREPARING
| Model |
|
|
|
|
|
|
|
|
| 22MP55HQ |
|
| 24MP55HQ | |||
|
|
|
|
|
|
|
|
|
Mounting on a wall |
|
| 23MP55HQ |
|
| 27MP55HQ | ||
|
|
|
|
|
|
|
| |
|
| 23MP55H |
|
|
|
|
| |
|
|
|
|
|
|
| ||
For proper ventilation, allow a clearance of 10 cm |
|
|
|
|
|
|
|
|
VESA (A x B) |
| 75 x 75 | 100 x 100 | |||||
on each side and from the wall. Detailed | Standard screw |
| M4 |
|
|
| ||
instructions are available from your dealer, see the | Number of screws | 4 |
|
|
|
|
| |
optional Tilt Wall Mounting Bracket Installation and | CAUTION | |
Setup Guide. | ||
|
10 cm
10 cm
10 cm
10 cm
If you intend to mount the Monitor set to a wall, attach Wall mounting interface (optional parts) to the back of the set.
When you install the Monitor set using a wall mounting interface (optional parts), attach it carefully so it will not drop.
1Please, Use the screw and wall mount interface in accordance with VESA Standards.
2If you use screw longer than standard, the monitor might be damaged internally.
yyDisconnect the power cord first, and then move or install the Monitor set. Otherwise electric shock may occur.
yyIf you install the Monitor set on a ceiling or slanted wall, it may fall and result in severe injury.
yyUse only an authorized LG wall mount and contact the local dealer or qualified personnel.
yyDo not over tighten the screws as this may cause damage to the Monitor set and void your warranty.
yyUse only screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.
yyScrew length from outer surface of back cover should be under 8mm.
Wall mount Pad
Back Cover
Wall mount Pad 
Back Cover
Standard screw
3If you use improper screw, the product might be damaged and drop from mounted position. In this case, LG Electronics is not responsible for it.
4VESA compatible only with respect to screw mounting interface dimensions and mounting screw specifications.
5Please use VESA standard as below.
yy784.8 mm (30.9 inch) and under
*Wall Mount Pad Thickness : 2.6 mm * Screw : Φ 4.0 mm x Pitch 0.7 mm x
Length 10 mm
yy787.4 mm (31.0 inch) and above
*Please use VESA standard wall mount pad and screws.
Max.8mm
NOTE
yyUse the screws that are listed on the VESA standard screw specifications.
yyThe wall mount kit will include an installation manual and necessary parts.
yyThe wall mount bracket is optional. You can obtain additional accessories from your local dealer.
yyThe length of screws may differ depending on the wall mount. Be sure to use the proper length.
yyFor more information, refer to the instructions supplied with the wall mount.