Using the Monitor SET, Connecting to a PC

USING THE MONITOR SET 11

USING THE MONITOR SET

Connecting to a PC

yyYour Monitor set supports Plug & Play*.

*Plug & Play: A PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention.

D-SUB connection

Transmits analog video from your PC to the Monitor set. Connect the PC and the Monitor set with the supplied D-sub 15 pin signal cable as shown in the following illustrations.

NOTE

yyWhen using a D-Sub signal input cable connector for Macintosh

yyMac adapter

For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-SUB VGA connector on the supplied cable to a 15 pin 2 row connector.

HDMI connection

Transmits the digital video and audio signals from your PC to the Monitor set. Connect the PC and the Monitor set with the HDMI cable as shown in the following illustrations.

NOTE

yyIf you use HDMI PC, it can cause compatibility problem.

CAUTION

yyConnect the signal input cable and tighten it by turning the screws clockwise.

yyDo not press the screen with your finger for a long time as this may result in temporary distortion on the screen.

yyAvoid displaying a fixed image on the screen for a long period of time to prevent image burn. Use a screensaver if possible.

NOTE

yyWhen you want to use two PC in our Monitor, please connect the signal cable(D-SUB/ HDMI) respectively in Monitor set.

yyIf you turn the Monitor set on while it is cold, the screen may flicker. This is normal.

yySome red, green, or blue spots may appear on the screen. This is normal.

ENGLISH