Onkyo TX-NR709 UP-A1 Dock for iPod/iPhone, Recording, Zone, Music Server and Internet Radio

To control another manufacturer’s component, point	69
the remote controller at that component.
To control an Onkyo component that’s connected	69
via u, point the remote controller at the AV
receiver. Be sure to enter the appropriate remote
control code first.
To control an Onkyo component that’s not	70
connected via u, point the remote controller at the
component. Be sure to enter the appropriate remote
control code first.

The entered remote control code may not be correct. — If more than one code is listed, try each one.

■Can’t learn commands from another remote controller

When learning commands, make sure that the	—
transmitting ends of both remote controllers are
pointing at each other.

Are you trying to learn from a remote controller that — cannot be used for learning? Some commands

cannot be learned, especially those that contain several instructions.

UP-A1 Dock for iPod/iPhone

■ There’s no sound

Make sure your iPod/iPhone is actually playing.	—
Make sure your iPod/iPhone is properly inserted in	—
the Dock.
Make sure the UP-A1 Dock is connected to the	—
UNIVERSAL PORT jack on the AV receiver.
Make sure the AV receiver is turned on, the correct —
input source is selected, and the volume is turned up.
Make sure the plugs are pushed in all the way.	—
Try resetting your iPod/iPhone.	—

■ There’s no video

Make sure that your iPod/iPhone model’s TV OUT — setting is set to On.

Make sure the correct input is selected on your TV	—
or the AV receiver.
Some versions of the iPod/iPhone do not output	—
video.

■The AV receiver’s remote controller doesn’t control my iPod/iPhone

Make sure your iPod/iPhone is properly inserted in — the Dock. If your iPod/iPhone is in a case, it may not connect properly to the Dock. Always remove your iPod/iPhone from the case before inserting it into the Dock.

The iPod/iPhone cannot be operated while it’s	—
displaying the Apple logo.
Make sure you’ve selected the right remote mode.	23
When you use the AV receiver’s remote controller,	—
point it toward your AV receiver.

When connecting the UP-A1 Dock to the radio tuner — UP-HT1 (North American models)/UP-DT1 (European, Australian and Asian models) with AUTO selected with the tuner’s Mode Selector switch, you can switch the input source between the UP-A1 Dock and the tuner, by pressing PORT repeatedly on the front panel.

If you still can’t control your iPod/iPhone, start	—
playback by pressing your iPod/iPhone model’s Play
button. Remote operation should then be possible.
Try resetting your iPod/iPhone.	—

Depending on your iPod/iPhone, some buttons may — not work as expected.

■The AV receiver unexpectedly selects your iPod/iPhone as the input source

Always pause iPod/iPhone playback before selecting — a different input source. If playback is not paused,

the Direct Change function may select your iPod/iPhone as the input source by mistake during the transition between tracks.

■ iPod/iPhone doesn’t work properly

Try reconnecting your iPod/iPhone.—

Recording

■ Can’t record

On your recorder, make sure the correct input is	—
selected.
To prevent signal loops and damage to the AV	—
receiver, input signals are not fed through to outputs
with the same name (VCR/DVR IN to VCR/DVR
OUT).
When the Pure Audio listening mode is selected,	—
recording is not possible because no video signals
are output. Select another listening mode.

Zone 2

■There’s no sound

Only components connected to analog inputs can be — played in Zone 2.

■The Zone 2 speakers produce no sound

Powered Zone 2 cannot be used if “Speakers	46
Type(Front)” is set to “Bi-Amp”.

Music Server and Internet Radio

■Can’t access the server or Internet radio

Check the network connection between the AV	—
receiver and your router or switch.
Make sure that your modem and router are properly	—
connected, and make sure they are both turned on.
Make sure the server is up and running and	89, 91
compatible with the AV receiver.
Check the “Network” settings.	60

■Playback stops while listening to music files on the server

Make sure your server is compatible with the AV	89, 91
receiver.
If you download or copy large files on your	—
computer, playback may be interrupted. Try closing
any unused programs, use a more powerful
computer, or use a dedicated server.

En

77